 | From £24.25 - Anglo Epoxy Repair Mortar Professional Quality.
- Unequalled hardness and epoxy bonding power.
- Provides fast setting (3-6 hours).
- Granite-hard, permanent repairs to badly cracked and worn concrete or stone floors.
- For use where conventional mortar or other fillers will loosen or fail.
- Epoxy Repair Mortar is virtually indestructible and ideal for repairs to factory floors, driveways, garage floors, steps indoors or out.
- May be feather-edged.
- Use on steps, expansion joints, floor fixings, building up levels.
- Priming is not required.
- Can be applied as a 5mm screed when used with Epoxy Bond.
- Usage rate: 5kg covers 0.6m2 at 5mm thickness.
- Available in 2.5Kg 5kg and 25kg packs.
|
 | From £12.75 - Epoxy Bond Primer.
- A two-pack epoxy resin adhesive primer,
- For use with Anglo Verti-Patch.
- Use Epoxy Bond before screeding with Epoxy Repair Mortar.
- Available in 1m2 and 6m2 packs.
|
 | From £18.75 - Anglo Epoxy Crack Filler is a liquid epoxy resin for filling cracks in concrete floors.
- Ideal for filling small holes due to the solvents free and non-shrink properties of Epoxy Crack Filler
- Available in 500ml pots.
- Coverage is approximately 25 linear metres of a crack 2mm wide and a depth of 5 mm.
- Pot life (usable life of the mixed components) for Epoxy Crack Filler is 20 minutes at 20 degrees, shorter at higher temperatures.
- Cureing time 3-4 hours at 20 degrees.
|
 | From £54.95 - Anglo Flexi-Joint Fill is a two-part pourable flexible joint sealant, for use in floor joints up to 25mm wide.
- Based on the most recent polyurethane technology.
- Flexi Joint Fill is easy to use without the need for applicator equipment and is ideal for filling and sealing expansion joints and concrete bay joints.
- Pot life of 1 hour, sealed joints accept traffic after 8-12 hours,
- It is suitable for interior or exterior use.
- An ideal for construction joints between concrete slabs, factory and warehouse floors, car parks, garages and forecourts etc.
- Anglo Flexi-Joint Primer is required with this product.
- Theoretical usage rate is 2 litres will fill approximately 20 meters of 10 mm wide x 10 mm deep joint.
- Size: 2 litres container.
|
 | From £38.00 - Anglo Speed Patch gives a durable, fast setting repair to damaged floors, frost spalled, eroded and cracked concrete, steps, troughs, ramps, covings etc. before painting.
- After priming simply mix the resin component with the fine dry aggregate.
- Excellent Bonding Power and Fast Curing.
- The special polymeric, accelerated cementitious formula provides excellent bonding power.
- Anglo Speed Patch cures quickly and is a tough, strong filler for deep pits and cracks,
- Speed Patch can be used as a bedding-in material for bolts or a thin surface screed.
- Available in 10kg and 20kg units comprising primer, accelerator and dry filler.
|
 | From £68.50 - Anglo Speed Patch Pourable is a quick and easy way to fill holes in heavily used concrete floors inside and outside.
- No primer is required - just mix the powder with water and pour into the hole.
- Anglo Speed Patch Pourable is a rapid setting concrete repair bonds to damp or dry surfaces and can be applied at thicknesses from feather edge to 100mm.
- Available in 25kg units.
|
 | From £46.50 - Anglo Verti-Patch is a two-part epoxy resin repair mortar with special lightweight fillers.
- Cures granit Hard.
- An epoxy repair mortar that will not lift or crack.
- Ideal for indoor and outdoor use.
- Verti-Patch may be feather edged.
- Use Verti-Patch for repairing vertical concrete, render and stone.
- Anglo Epoxy Bond is recommended as a primer before using this product.
- Useage rate, 2.5 Kg covers 0.6m2 at 5mm thickness.
|
 | From £64.50 - Anglo Speed Screed smooths uneven, damaged or worn concrete floors.
- A pour on, durable re-surfacing material.
- Rough concrete floors can be transformed rapidly and easily with this self-smoothing, hard wearing material designed to meet the demands of industrial use.
- Anglo Speed Screed is pre-blended for easy mixing and fast application and it provides a mid grey, non-dusting, slip-resistant surface that requires no further treatment before use.
- Can be applied from 3mm to 15mm thick
- Suitable for interior and exterior use.
- The theoretical usage rate is 25kg cover 3.7 m2 at 3mm thickness.
- Available size for Speed Screed is 25kg
|
 | From £135.00 - A coarser version of Anglo Epoxy Repair Mortar for filling deeper repairs before finishing with Anglo Epoxy Repair Mortar.
- Anglo Epoxy Repair Mortar Deep Fill can be applied at 15mm - 100mm thick in one layer.
- Epoxy Repair Mortar is available in 50kg units.
- The coverage rate of 50kg is approximately 1m2 at 30mm thick.
|
 | From £46.99 - Rustoleum 5140 Light Weight Repair Mortar.
- Solvent Free.
- Resistant against heavy abrasion and impact.
- Suitable for Heavy Traffic.
- Application wet on wet with 5120 Tac Coat.
- Available in 5 litres
|
 | From £9.99 - Rustoleum 5120 Tac Primer.
- Solvent free two component epoxy adhesion primer for use on mineral substrates like concrete and masonry.
- Offers good adhesion prior to application of 5140.
- Available in 0.5 litre tins
|
 | From £245.00 - Rustoleum 5400 Epoxy Mortar is a solvent-free self-levelling epoxy mortar and coating in one.
- Use on cleaned horizontal concrete floors.
- Protection against high humidity, moisture, and chemical spillage.
- Resistant to heavy abrasion, pedestrian, vehicular traffic and impact.
- Rustoleum 5400 Epoxy Mortar is available in a 22.5 Kg pack.
|
