 | From £47.75 - PEGAPRIM ISOFIX is a excellent white, very fast drying stain block primer which isolates odours.
- USE IN DECORATING VOIDS.
- Blocks ALL stains, including wood bleedings, tar, soot and graffiti.
- PEGAPRIM ISOFIX has excellent adhesion on metal, wood and stainless steel.
- Dries in 45 minutes,
- This stain block primer is recoatable with most decorative paints.
- Pegaprim Isofix is a Shellac based coating.
- This primer has a theoretical coverage of 10 m2 per litre.
- Satin finish.
- Available in 5 litre paint tins.
|
 | From £11.80 - Zinsser Bulls Eye 1-2-3 is a water based all purpose Primer.
- Bulls Eye offers excellent adhesion without sanding.
- Stops water stains, graffiti, grease spots.
- Resins tannins from cedar and redwood.
- Stops the growth of mould and mildew making it ideal in kitchens, bathrooms and basements.
- Zinsser Bulls Eye 1-2-3 should be used in areas of high humidity.
- Apply by paint brush, paint roller or airless spray.
- Coverage 350-450 sq. ft. per gallon (0.95 Litres).
- Re-coatable after just 1 hour.
|
 | From £49.50 - Zinsser All Coat offers high hiding power over dark or inconsistent colours.
- Water based, fast drying, very low odour.
- Dries to a washable, dead-flat finish.
- Use Zinsser All Coat on wood, concrete, plasterboard, Plasticol and galvanized metal.
- Can be tinted to off white and pastel colours.
- Apply Zinsser All Coat by paint brush, paint roller or airless spray.
- Excellent adhesion to glossy surfaces with out sanding including Upvc, fibreglass even ceramic surfaces.
- Coverage 10m2 per litre. most cases only one coat necessary.
|
 | From £13.05 - Zinsser BIN Primer Sealer is the original shellac-based white-pigmented primer-sealer stain-killer.
- USE IN DECORATING VOIDS.
- Can be used on all interior surfaces and spot priming exterior surfaces.
- Zinsser BIN Primer Sealer is formulated to seal, prime and block out stains on previously painted or new work.
- Any oil or latex paint be applied over Zinsser BIN.
- Zinsser BIN Primer Sealer seals new wood, wall-board, cured plaster, all porous surfaces.
- Adheres to smooth and other difficult materials.
- Blocks stains, water marks, knots and sap, smoke soot, graffiti, grease and crayon.
- Provides interior vapour barrier.
- Apply by paint brush, paint roller or airless spray.
- Zinsser BIN primer Sealer Dries fast; lets you top coat in 45 minutes.
|
 | From £10.55 - Zinsser Cover Stain is a solvent based primer sealer for interior and exterior use.
- Use Zinsser Cover stain on new and previously painted surfaces.
- Stops stains from graffiti, Smoke, Grease and crayon.
- Zinsser Cover Stain seals porous surfaces such as plaster board, masonry and wood.
- Cover Stain will hide rust and mildew.
- Apply by paint brush, paint roller or airless spray.
- Coverage 42m2 per 3.75 litres.
- Re-coatable after 1 hour.
|
 | From £10.75 - Bedec Stain Block is suitable for interior and exterior use.
- Bedec Stain Block is water based.
- Seals stains from Marker Pen, Nicotine, Cryon, Smoke Water Stains, Coffee and Tea.
- USE IN DECORATING VOIDS.
- Apply Stain Block by paint brush, paint roller or spray.
- Coverage is 10 m2 per litre.
- Available in 0.75 litres 2.5 litres and 5 litres.
|
 | From £18.95 - Amercoat 4116 is a grey single pack, high build fast drying primer.
- Xylene based alkyd zinc phosphate primer.
- Amercoat 4116 is EPA compliant in the UK as a single coat protective finish for general structural steelwork in dry internal environments.
- It is corrosion inhibiting, quick and easy to apply, along with being tough and durable
- Extensive track record.
- Amercoat 4116 theoretical coverage rate is 7.7 m2 per litre.
- Use this primer with Amercoat Thinners 65 when spraying.
- Can be applied by brush and roller..
- Available in 5 litre paint tins for easy handling.
|
 | From £18.95 - Amercoat 4116 is a red oxide single pack, high build, fast drying primer
- Xylene based, alkyd zinc phosphate primer.
- This primer is EPA compliant in the UK as a single coat protective finish for general structural steelwork in dry internal environments.
- It is corrosion inhibiting, quick and easy to apply.
- Tough and durable.
- Extensive track record.
- This primer can be applied by brush or roller.
- Amercoat 4116 theoretical coverage rate is 7.7 m2 per litre.
- Available in 5 litre paint tins for easy handeling.
|
 | From £38.50 - Primer 44HS is a fixing and adhesion layer for porous and unpainted mineral substrates.
- This primer should be used on Roof Tiles before applying Dac Hydro D.
- It is a solvent dilutable impregnating primer based on chlorinated rubber.
- Primer 44 has excellent fixing capacity, is flexible, with good UV resistance.
- Is rain resistant after 1 hour at 20ºC.
- The theoretical coverage rate of Primer 44 is 5 - 10 m2 per litre depending upon porosity of the substrate.
- Size: 5/20 litres paint tins.
|
 | From £23.75 - Parafix primer for flat roofs.
- Primer for use on flat roofs with at least 1% of fall before applying Dacfill water based roof coating.
- Available in 5 Litre paint tins.
|
 | From £65.00 - Rustoleum 569 (red) and 580 (grey) are fast drying, single component primers.
- These primers are ideal where maintenance tasks have to be completed in one day and where cleaning to bare metal is not possible.
- 569 and 580 are repaintable in 2 hours at 20 degrees C,
- Rustoleum 569 and 580 are aroma free, short oil alkyd,
- Applied by paint brush, paint roller or spray.
- Theoretical coverage rate of these Rustoleum primers is 12m2 per litre.
- Size: 5 litres.
|
 | From £10.75 - Multi Surface Metal Primer is water based and Low odour.
- Multi Surface Metal Primer is rust resisting.
- Can be used inside and outside.
- Multi surface Metal Primer can be used on Mild Steel, Iron and Cast Iron.
- Coverage 10-12 m2 per Litre.
- Can be applied by paint brush paint roller or spray.
- Available in 0.75 litres 2.5 Litres and 5 litres.
|
 | From £57.75 - Rustoleum 769 Damp Proof Rust Primer is a specially developed for use on manually de-rusted surface.
- Its formula is based on fish oil containing alkyd resin which ensures a very low surface tension.
- 769 has excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
- This primer requires minimum surface preparation.
- It is able to be applied onto damp surfaces, leaves a flat red finish.
- 769 Damp Proof Rust Primer can be overcoated with virtually all paint systems.
- Very low odour and can be exposed for a period of up to one year without top coating.
- 769 Damp Proof Rust Primer's theoretical coverage rate is 14 m2 per litre.
- Available in 5 litre paint tins.
|
 | From £15.50 - Rustoleum Super Adhesive 3333 is a water-based, epoxy, super adhesive.
- 3333 is a 2 pack primer for all smooth closed substrates such as very smooth surfaces
- This primer is used on power floated concrete floors, ceramic tiles, glass, stainless steel, and all smooth surfaces.
- Perfect bond without blasting or etching, can be overcoated with virtually any other paint or coating.
- Ideal primer to overcoat tiled walls.
- Theoretical coverage rate is 41.2 m2 per litre.
- Available in 1 and 5 Litre paint tins.
|
 | From £37.00 - Rustoleum 3302 is an adhesion coating based on a solvent containing acrylic resin.
- It adheres to all those difficult surfaces such as glass, galvanised or stainless steel, copper, brass, porcelain, most plastics and other smooth surfaces.
- This primer is also available in the colour shop range.
- Theoretical coverage rate is 35 m2 per litre.
- Size: 0.75 and 5 litres
|
 | From £24.75 - Rustoleum 3369/3380 CombiPrimer is an fast drying anti-corrosion primer
- based on an aromatic free short oil alkyd resin.
- This primer contains rust inhibitive pigments and are lead and chromate free.
- CombiPrimer should be used on new or rusted steel surfaces to provide and enhance protection against corrosion.
- It is intended for brush application but can also be applied by roller or spray.
- It should be used in general industrial exposures, normal humidity and interior applications and should be recoated with CombiColor Metal 7300.
- Theoretical coverage rate for this primer is 12m2 per litre.
- Available in 2.5 litres paint cans
|
 | From £12.25 - Coo Var All Metals Primer is based on water thinned resins and is suitable for use inside and outside
- Use All Metal primer on iron, steel galvanised surfaces, aluminium, brass, copper and many more.
- It is quick drying and can be overcoated with a large range to top coats.
- This primer is ideal for railings and garage doors.
- It will enhance the performance of Coo Var Hammercote and essential as a primer on non-ferrous and galvanised surfaces.
- Coo Var All Metals Primer has a theoretical coverage rate of 10 m2 per litre.
- Drying time: Touch Dry in 30 mins, Hard Dry in 4 hours.
- Application by brush, roller or spray.
- Available in red or grey.
- Brushwash/Thinners - Clean water.
- Available in 2.5 and 5 litre paint tins for ease of handling.
|
 | From £8.80 - Galva Plus Spray is a fast drying zinc/aluminium coating based on an epoxy ester resin.
- This primer contains pure zinc and aluminium as pigments.
- Galva Plus zinc primer has an appearance similar to new galvanised steel.
- It can be used for touching-up galvanised steel surfaces.
- Galva Plus should be used as a single coat in light industrial exposures and corrosive environments.
- It resists 310 hours of salt spray testing (DIN 500210 SS).
- Galva Plus has lower zinc contents and more aluminium.
- Available in 500 ml paint spray.
- The theoretical coverage rate is 1.7m2 per can dependant upon substrate.
|
 | From £12.05 - Rustoleum Galva Zinc Cold Galvanising Compound.
- It is a fast drying, zinc rich primer based on a phenoxy resin.
- Rustoleum Galva Zinc contains pure zinc as pigment and provdes cathodic protection.
- This primer should be used on new, bare steel, blasted steel or galvanised steel surfaces.
- It is intended for brush application on small areas or for touch-up.
- Galva Zinc resists 500 hours of salt water spray testing (DIN 50021 SS).
- Recoatable after 4 hours.
- Size: 1 Kg.
|
 | From £9.75 - Owatrol Oil, for treating rusted surfaces:
- Ensure surface is dry and free from oil and grease.
- Remove any loose or flakey material.
- Do not remove firm rust.
- Apply Owatrol Oil wet on wet, as fast as rust will absorb it until aneven sheen is achieved.
- Leave to dry (24 hours).
- Apply finish coats.
- For lightly rusted surfaces use a mixture of 1 part Owatrol Oil to 2 parts Metal Primer.
- Do not mix or overcoat Owatrol Oil with paints containing 'hot' solvents ie. Xylene or two part coatings.
- Increases actual paint coverage by up to 25% or more.
- Makes paint STICK. Eliminates peeling.
- Adds to paint quality for long lasting finish.
- Keeps wet edge open longer.
- Coverage: approx. 18m²/ 1L.
- Available in 500 ML. 1 Litre and 5 Litres.
|
 | From £13.50 - CIP Corrosive Inhibiting Primer.
- CIP maybe used on new or rusted metal and is especially recommended for the protection of cars,
- Use CIP Corrosive Inhibiting Primer for civil engineering and marine equipment.
- Also on nautical ballast tanks as well as every day items such as metal railings and gates.
- CIP is ideal for use on all kinds of boats.
- Touch Dry 6 Hours, Re-coat – With Oil / Alkyd Paints or CIP - 24 Hours. With High Solvent Finishes - 48 Hours.
- CIP (Corrosive Inhibiting Primer) is a non-toxic, coloured anti-corrosive primer that possess the unique penetrating properties of Owatrol Oil.
- CIP can be over coated with any coating from an ordinary decorative paint to a high solvent finish (urethane, epoxy, chlorinated rubber etc) without risk of it dissolving.
- Simple and easy to use, applied by paint brush, roller or spray with minimal preparation.
- CIP stabilises the surface penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer that other coatings can firmly adhere to.
- Coverage:5m2 per litre.
- Available in 500Ml. 2.5 Litres or 20 Litres.
|
 | From £68.28 - Coo Var Rust Converter converts rust into a stable surface for painting.
- It is a water based combined rust converter/primer.
- For use in industrial, marine and domestic painting applications.
- Rust Converter is easy to apply.
- Works even in damp conditions, is low odour.
- Rust Converter is non hazardous in use and in storage, non flammable and environmentally safe.
- Coo Var Rust Converter has been proven in the North Sea Oil Fields since 1984.
- Ideal on very rusty surfaces prior to painting with Hammercote or other top coat paints.
- Can be overcoated with a primer or top coat.
- Apply by paint brush.
- Available in 2.5 Litre paint containers.
|
 | From £4.25 - Flag Rust Converter is a water-based heavy duty rust killer.
- Paint on to neutralise rust and form hard black coating.
- Rust Converter can be over-painted using standard solvent based paints.
- Will prevents rust re-occurring.
- Rust Converter is water-based.
- Quick drying and easy to use.
- Can be applied by brush.
- Available in 250ml. paint tins.
- (Previously sold by Screwfix)
|
 | From £54.00 - A water based matt primer undercoat for spray, brush or roller application.
- Quick drying, high solids, use on softwood MDF and HDF joinery, doors etc.
- Easy sanding, overcoat with water based or white spirit based paints.
- Coverage rate is 12-16 m2 per litre.
- Available in 20 litre drums.
|
