Fire Resistant Paints » Timber and Wood Paint » Bollom Intulac Satin and Matt Topcoat

Bollom Intulac Satin and Matt Topcoat USE WITH BASE COAT

• Intulac Satin and Matt Topcoat
• Must be used over Intulac Intumescent Varnish.
• Intulac is not recommended for use on doors, hand rails, stair tread, floors or surfaces where significant physical wear is likely.
  
• Offers Class1 and Class 0 Spread of Flame only.
• Apply by paint brush or paint spray.
• If a Satin or Matt finish is required, apply minimum of one coat of Intuclear Overcoat at 14m2/litre.
• For areas of high humidity, apply 2 coats of Intulac Satin Topcoat at 14m2/litre/coat.
• Available in 2.5 litre tins.
• Apply by Brush or Conventional Spray.
• Touch dry 1.5  hours, will vary with ambient temperature, humidity and ventilation.
• Recoat: 12 hours, dependent on site conditions.
• Coverage rate 14m2 per litre.