Rustoleum Mathys Pegakote for Concrete Floors and Walls
Rustoleum Pegakote is a two-pack water based Floor Epoxy coating.
Suitable for Factory, Workshop, concrete and domestic use.
Very hard wearing, abrasion, oils and solvents resistant.
It is suitable for garages, warehouses, showrooms, corridors, indoor car parks, workshops, shops, store rooms, factory units, boiler rooms and heavy traffic areas.
Fully certified and recommended for the health and food industry.
Rust Oleum Mathys Pegakote can be applied directly on most mineral substrates old concrete, tiles, glass etc.
New concrete floors should be fully dried and cured and porous enough to accept the coating.
Suitable for indoor use on concrete and power float (must use primer) substrates and walls.
Solvent-free, almost odourless.
Low VOC.
Easy to mix liquid.
Excellent abrasion resistance.
Resistant to oils and solvents.
Easy to clean.
Brush, roller or airless spray
Clean up with water
Dry to touch in 3 hours, dry to recoat in 24 hours.
These colours are for reference only and are an approximation of the true colours. The quality, type and settings of the output device used to display this page will also affect the visible colour.
