Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Rustoleum 2800 Spot Marking Aerosol is a quick drying quality paint for professional marking purposes at public works (utility works / Telecom) building works, industrial sites and adheres to almost any substrate.
By means of the 360° valve the aerosol is sprayable in all directions. Rustoleum Spot Marking Aerosol 2800 is based on a fast drying acrylic resin. All products in this range are aromatic free and based on lead- and chromate free pigments.
Spot Marking Aerosol 2800 can be used on metal, concrete, asphalt, gravel, soil and grass, etc. Rustoleum Spot Marking Aerosol 2800 is not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. Designed for quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.
Remove dirt, grease, oil and all other surface contaminants by appropriate means. The surface must be clean and dry during application. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. It is not possible to clean the spray button in the usual way. Due to the use of the 360° valve this is not necessary. For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.
- Heat Resistance: 100°C (dry heat)
- Available as Box of 12 x 500ml Aerosols
|Stock Colours:||Flourescent Yellow, Flourescent Green, Flourescent Orange|
|Suitable Substrates:||For metal, concrete, asphalt, gravel, soil and grass, etc.|
|Theoretical Coverage:||1.5m2 per litre at 25 microns dry|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||25 microns|
|Touch Dry:||5 minutes at 20°C|
|Dry To Handle:||7 days at 20°C|
|Cleaner / Thinner:||30 minutes at 20°C|
|Shelf Life:||3 years|
|Packaging:||Available in Boxes of 12 x 500ml Aerosols|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.