This product is now discontinued. Please contact our technical team for an alternative.
Scotchkote 169 Rapid Setting Polymeric Lining is specifically designed as an in-situ applied, rapid setting lining system for use as non structural rehabilitation of drinking water mains. Scotchkote 169 Rapid Setting Polymeric Lining is highly moist tolerant during application and curing and an increased level of customer service due to the same day return to service and reduced road traffic disruption.
Scotchkote 169 Rapid Setting Polymeric Lining facilitates rapid identification and rectification of lining faults in drinking water mains. The rapid curing characteristics of Scotchkote 169 Rapid Setting Polymeric Lining allows return to service procedures just 30 minutes after completion of lining operation.
Scotchkote 169 Rapid Setting Polymeric Lining should only be applied by special plural feed lining equipment that has been independently assessed and approved to meet industrial regulations. The substance should be heated to approximately 20-40 degrees celsius to allow the material to cure fast with a return-to-service cure time of just 30 minutes.
Surface and Environment
Scotchkote 169 Rapid Setting Polymeric Lining yields glossy, tack free linings irrespective of application conditions. Scotchkote 169 Rapid Setting Polymeric Lining is specifically designed for use in water mains and is highly moisture tolerant.
- Increased customer satisfaction as a result of same day return to service and reduced road traffic disruption.
- Rapid setting characteristics minimize water damage from service connections or valves.
- Facilitates rapid indentification and rectification of lining faults.
- Highly moisture tolerant during application and curing.
- Yields glossy, tack-free linings irrespective of application conditions.
- Low viscosity minimizes heating requirements for efficient material transfer.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.