Due to the closure of 3M Northallerton, this product is now discontinued. Please contact our technical team for a suitable alternative.
3M Scotchkote Epoxy Metal Surfacer FG 502 is part of Promains fantastic range of Metal Repair Products designed for resurfacing and recasting metal components.
3M Scotchkote Epoxy Metal Surfacer FG 502 is an innovative solution, that provides engineering and maintenance teams with a product that has the ability to mend, rather than spend copious amounts of money on replacement costs, which have increased gradually over the last couple of decades.
3M Scotchkote Epoxy Metal Surfacer FG 502 can be applied using squeegee or a stiff brush to surfaces which have been suitably prepared, by that we mean cleaned and contamination free. The product should be applied immediately after preparation to ensure the surface is in the right state.
Surface and Environment
3M Scotchkote Epoxy Metal Surfacer FG 502 is highly suited for use on metal machinery and equipment in need or a resurfacing. 3M Scotchkote Epoxy MEtal Surfacer FG 502 can be used internally or externally offering good protection against corrosion and erosion.
- Scotchkote Epoxy Metal Surfacer FG502.
- Combines good application characteristics with good erosion and corrosion resistance.
- primarily developed for resurfacing and recasting metal components.
- Initial set 4 hours.
- Theoretical Coverage Rate: 1.88m
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.