This product is now discontinued. Please contact our technical team for an alternative.
Scotchkote HF 803 High Build Wall Coating, formerly Thortex Wall-Tech HF, has been specially manufactured as a low maintenance, high build coating for internal cementitious and plaster wall surfaces.
Scotchkote HF 803 High Build Wall Coating is best used in internal application for creating a smooth, white finish that can be easily cleaned on a regularly basis without damaging the substrate or coating. Scotchkote HF 803 High Build Wall Coating is ideal for use in the Rail Environment, for creating a coating that is highly resistant to abrasion and impact, that walls are often exposed to on a daily basis.
Scotchkote HF 803 High Build Wall Coating can be applied using brush, roller or airless spray to create a high quality finish that is ultra quick to dry. After just 30 minutes the surface will be dry to touch, meaning downtime is kept to a minimum and normal service can be resumed. This excellent product has a theoretical coverage rate of 5.5m2 per litre and is available in 20 litre containers for covering large surface areas.
Surface and Environment
Scotchkote HF 803 High Build Wall Coating can be applied to most surfaces without the need for a primer but is ideally suited for application to cementitious and plaster wall surfaces found in communal environments such as the underground or in train stations for example.
- Available in white only.
- Combines good application characteristics with fast drying capabilities.
- Can be applied to most surfaces without the need for a primer.
- Can be applied by brush, roller or airless spray.
- Provides an abrasion resistant finish with a high degree of flexibility.
- Theoretical Coverage Rate 5.5 sq metres per litre at 100 microns dft.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.