This product is now discontinued. Please contact our technical team for an alternative.
Scotchkote LW 405 Epoxy Concrete Mortar, formerly Thortex Wall-Tech LW, has been specifically developed as a 3 component, 100% solids, lightweight repair mortar for use on concrete surfaces.
Scotchkote LW 405 Epoxy Concrete Mortar is best used in areas where a quick repair is needed to small gaps and cracks found on vertical or horizontal surfaces. Even when used on vertical surfaces, i.e walls, the mortar forms an excellent bond that holds up well.
Scotchkote LW 405 Epoxy Concrete Mortar is designed for application using a trowel or float, offering ease and speed of application with a hard dry time of 8 hours.
Surface and Environment
Scotchkote LW 405 Epoxy Concrete Mortar has been developed specifically for use on concrete surfaces, offering excellent adhesion to horizontal or vertical surfaces. This lightweight mortar is ideal for small repair jobs domestically, commercially or industrially.
- Formerly Thortex Wall-Tech LW.
- Combines good application characteristics.
- Designed for application by trowel or float.
- Can be used to form wall/floor covings.
- Excellent hold up on vertical and overhead surfaces.
- Colour: light grey.
- Overcoat time: 24 hours.
- Coverage rate: 0.18 m2 per litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.