This product is now discontinued. Please contact our technical team for an alternative.
Scotchkote Poly-Tech VCL 667 Vapour Control Layer is made up of a polyester reinforced aluminium core and coated with a rubber modified, self adhesive bitumen coating.
Scotchkote Poly-Tech VCL 667 Vapour Control Layer is a high performance vapour control layer for use in self-adhesive/cold applied BUR systems.
Scotchkote Poly-Tech VCL 667 Vapour Control Layer can be applied easily after a suitable bonding primer has been applied to the surface. Please give us a call for more information on the application procedure.
Surface and Environment
Scotchkote Poly-Tech VCL 667 Vapour Control Layer provides a quick means of completing side laps and can be applied to most flat roof systems, no matter what substrate.
- It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self adhesive bitumen coating.
- The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish.
- A minimum selvedge of 75mm width, protected with release film, provides a quick means of completing side laps.
- Available in 15m x 1m.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.