This product is now discontinued. Please contact our technical team for an alternative.
Scotchkote RS 820 Epoxy Screed, formerly Thortex Floor-Tech RS, has been specifically developed as a three component 100% solids resurfacing screed application to concrete floor surfaces.
Scotchkote RS 820 Epoxy Screed is a versatile product that can be used in a variety of environments where a smooth flooring is required and can also be used to form wall/floor covings.
Scotchkote RS 820 Epoxy Screed is a 3 component product that needs mixing specifically prior before use. Once this has been done you should then apply the epoxy screed, using a trowel or float, to an appropriate primer once it is still wet and allow the coating to cure. This will take approximately 8 hours in normal conditions of about 20 degrees celsius.
Surface and Environment
Scotchkote RS 820 Epoxy Screed is a tough substance that can be applied almost anywhere, offering excellent resistance to abrasion and impact as well high resistance to most industrial chemicals.
- Formerly Thortex Floor-Tech RS.
- Combines good application characteristics with excellent chemical resistance.
- Designed for application by trowel or float.
- Can be used to form wall/floor covings and can be laid to falls.
- Overcoat time: 8 hours.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.