This product is now discontinued. Please contact our technical team for an alternative on 01462 421333.
Scotchkote Urethane Elastomer 80BG 536, formerly Thortex flexi-tech 80 BG and Thistlebond TR325 80, is an especially flexible, elastomeric system, designed for resurfacing rubber components.
Scotchkote Urethane Elastomer 80BG 536 is a highly formulated product that has been purposely manufactured for use on rubber substrates, to resurface things like impellers, chutes and hoppers, as well as many more.
Scotchkote Urethane Elastomer 80BG 536 works in a similar fashion to factory produced rubbers and can be applied using a brush to produce thicknesses of up to 20mm with an initial set time of 1 hour.
Surface and Environment
Scotchkote Urethane Elastomer 80BG 536 can be used internally or externally for use in an industrial or commercial environment where a rejuvenation project is of high importance.
Why not give us a call? We will happily tell you if this product is right for you, or offer you an alternative product that might be more suited to your requirements.
- Scotchkote Urethane Elastomer 80BG 536.
- Properties comparable to factory produced rubbers.
- Designed for application by brush at thicknesses up to 500 microns (20 mil).
- Primarily designed for use to resurface impellers, chutes, hoppers etc.
- Initial set time 1 hour.
- Available 4 x 500gm units.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.