This product has been discontinued please consider Rustoleum Pegakote
Rustoleum 5900 Water Based Epoxy Floor Coating is part of Promains excellent range of Industrial Floor Paints that should be applied over Rustoleum 5900 Primers for a better performance.
Rustoleum 5900 Water Based Epoxy Floor Coating offers good chemical and wear resistance.
Rustoleum 5900 Water Based Epoxy Floor Coating is best used in light industrial exposures for resistance to moderate abrasion, high humid and moisturous conditions, and a range of chemicals. Rustoleum 5900 Water Based Epoxy Floor Coating should be applied to sound mineral substrates for a satin finish in a selection of appealing colours.
Rustoleum 5900 Water Based Epoxy Floor Coating can be applied using brush, roller or spray to industrial floors and has a theoretical coverage rate of 6.5m2 per litre. However, this may differ, depending on the porosity of the surface. Rustoleum 5900 is available in 5 litre tins for an overall coverage rate of approximately 30m2. Surfaces do not have to be dry as Rustoleum 5900 can be applied to slightly damp surfaces.
Surface and Environment
Rustoleum 5900 Water Based Epoxy Floor Coating can be used directly on galvanised, bare or blasted steel as well as concrete floors and walls in light industrial exposures where a degree of abrasion resistance is an essential.
- Rustoleum 5900 Water Based Epoxy System.
- 2-pack epoxy floor coating.
- Primer, impregnator and topcoats.
- Rustoleum 5900 Water Based Epoxy System can be used directly to Galvanised or Bare Steel.
- Suitable for use with concrete floors & walls, masonry etc.
- Fast drying.
- Applied directly to slightly damp surfaces.
- Good chemical and wear resistance
- Low odour during application
- Rustoleum 5900 Water Based Epoxy System can be applied by brush or roller
- Theoretical coverage rate 6.5 m2 per litre
- Available in most RAL Colours
- Available in 5 litre tins.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.