Rustoleum 9600 Polyurethane floor paint is a 2 part high gloss aliphatic PU, offering a very durable and colour fast finish for metal or concrete floors and walls
Rustoleum 9600 Polyurethane floor paint is a two component aliphatic polyurethane, a high gloss solvent based polyurethane for a very durable and colourfast finish for floors and walls, metal or concrete. Rustoleum 9600 Topcoats assure appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and chemical cleaning; high humidity and moisture conditions. Rustoleum Topcoats are especially recommended when weather resistance is required.
Rustoleum 9600 Topcoats are intended for application on substrates which are coated with Rustoleum epoxy systems. Highly recommended for use as a topcoat in extreme climatic conditions. This topcoat product has been specifically designed for heavy industrial and marine exposures where weather resistance is required.
9600 Polyurethane topcoat can be applied by spray, roller and brush application if the appropriate thinner is used. In an average heated room of about 20 degrees Celsius drying time will be roughly 6 hours and that is to touch dry. Ready to recoat after 16 hours and full hardness will be achieved after 5 days. Stir individual components thoroughly before mixing them together using a low speed mixer.
Top coating is essential in areas where there is a high level of weathering. Where there is wind, rain or high levels of UV light exposure, Rustoleum Polyurethane is an ideal and practical product that will provide you with a high level of protection. Recommended for use on floors, walls, metal or concrete.
- Most colours available from the Colour Shop range of 30,000 colours. Please call.
- RUST-OLEUM 9600 Topcoats assure appropriate protection against strong chemicals, acids, alkalis and solvents, frequent product spillage and chemical cleaning, high humidity and moisture conditions
- RUST-OLEUM 9600 Topcoats are especially recommended when weather resistance is required
- Designed for heavy industrial and marine exposures with good gloss retention
- Drying can be accelerated with Accelerator 9996
|Type:||Solvent Based Polyurethane|
|Stock Colours:||Transparent, Steel Grey RAL 7001, White RAL 9010|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||416 g/l|
|Suitable Substrates:||Substrates which are coated with Rust-oleum Epoxy Systems|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||13.2 m2 per litre|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||40 microns|
|Pot Life:||4 hours for a 5L mix at 20°C|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||5 days at 20°C|
|Cleaner / Thinner:||Thinner 190N or Thinner 191 (dependant on application)|
|Shelf Life:||5 years from date of production in unopened cans|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.