Acrypol Scrim for Roofs and Gutters, 150mm x 20m

SKU
id3666
Non Hazardous
For repairing cracks in gutters, asbestos roofs, asphalt, felt, metal, single ply and fibreglass roofing.
Supplied as a 150mm wide by 20 metre long roll
£41.40 £34.50
In stock
Product Description

Acrypol Scrim for Roofs and Gutters is an instant repair product designed for use on roofing and guttering, domestically or commercially. Acrypol Scrim for Roofs and Gutters works well to bridge gaps and cracks to bring the structure back to life.

Best Uses

Acrypol Scrim for Roofs and Gutters can be incorporated into one application of Acrypol+ that works super effectively to bridge major splits and cracks in roofs and gutters.

Application

Acrypol Scrim for Roofs and Gutters:-

  • Acrypol Scrim can be cut with scissors and forms well into most surfaces
  • Thin enough to be absorbed into a single coat of Acrypol+ with no visible seams or laps

For application onto wet Acrypol or Acrypol+, press into first coat with mini paint roller then apply a second coat immediately after.

Surface and Environment

Acrypol Scrim for Roofs and Gutters has been specifically manufactured for use on Roofs and Gutters and is used to instantly repair the surface when used in conjunction with Acrypol+ Waterproof Coating. Acrypol Scrim for Roofs and Gutters can be used to reinforce splits in asbestos sheets, asphalt, felt, metal, single ply and fibreglass roofing.

Technical Details
  • For use with Acrypol, Acrypol+ or Fillcoat
  • Reinforce splits in asbestos sheets, asphalt, felt, metal, single ply and fibreglass roofing
  • Use to reinforce gutters, roof fittings, laps in sheet roofing as well as cracks in glass
  • Easy to apply.
  • Supplied as a 150mm wide by 20 metre long roll
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use