Rustoleum Hard Hat 2117 Galva Zinc-Alu

SKU
ID9874
UN1950 (Class: 3, Pk Grp: III)
Suitable for dry heat 450°C. Designed for use on damaged galvanized surfaces.
Available in 500ml Spray
£15.08 £12.57
In stock
Product Description

Rustoleum Galva Zinc-Alu is suitable for a variety of environments including dry heat up to 450°C. Designed for application damaged galvanized surfaces.

Rustoleum Galva Zinc-Alu is a zinc rich coating based on an epoxy ester resin that works to dry quickly. Galva Zinc-Alu contains pure Zinc and Aluminium pigments and provides cathodic protection.

Best Uses

Rustoleum Galva Zinc-Alu 2117 is ideal for use in light industrial exposures, corrosive environments and high humidity areas with just one single application. When dry you will achieve a flat aluminium finish.

Application

Rustoleum Zinc Aluminium Spray 2117 should be used on damaged galvanized steel surfaces. Rustoleum Zinc Aluminium Spray 2117 is intended to be applied on small areas or for touch-up. 2117 should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas.

Surface and Environment

Rustoleum Galva Zinc-Alu can be used on a variety of environments including those of extreme heat for a dry heat resistance of up to 300°C. Specifically designed for application to new or bare steel, blasted steel or galvanized steel surfaces.

Technical Details

Notes

  • Can be recoated with non-saponifiable coatings
  • Used as a single coat in light industrial exposures, corrosive environments and high humidity areas
  • Heat resistance: 300°C (dry heat)

Technical Info

Components: One Part
Type: Zinc Rich Primer / Topcoat Based On Epoxy Ester Resin
Finish: Matt Metallic
Stock Colours: Aluminium
Tintable: No
VOC Content: 647.0g per Litre
Volume Solids:  
Suitable Substrates: For Galvanised Steel
Application Method: Aerosol
Theoretical Coverage: 1,2 m2 per spay can at 35 microns dry
Wet Film Thickness (WFT): 115 microns
Dry Film Thickness (DFT): 35 microns
Induction Time: -
Pot Life: -
Touch Dry: 20 minutes at 20°C
Overcoatable: Within 2 hours or after 48 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner:  
Shelf Life: 3 years
Packaging: Available in 500ml Aerosol