This product is now discontinued. Please see Rustoleum 7200 PU as a potential alternative.
Anglo Slip-Resistant Grade Floor Paint is a single pack polyurethane which will seal concrete floors and produce a fine textured anti-slip finish, ideal large areas such as warehouses, factory floors and indoor car parks.
Anglo Slip-Resistant Grade Floor Paint is best used for sealing and painting substrates such as concrete floors, cement screeds, garages floors, indoor car parks, factories, workshops, kitchens, industrial environments, basements, stairs plus many more.
When Anglo Slip-Resistant Grade Floor Paint is applied to a suitable prepared concrete floor, it is ideal for area such as car parks, factories, kitchens, warehouses, workshops, external concrete areas, garages, basements, stairs, cement screeds, industrial environments, kitchen floors plus many more.
Before application of Anglo Slip-Resistant Grade Floor Paint concrete substrates will need to be fully cured, clean, dry and free from any lose material. If laitance is present on the surface (a soft, easily crumbled skin) this will need to be removed by either mechanically abrading or acid etching. Anglo Slip-Resistant Grade is best applied via roller to a prepared surface. 2 coats will be required applying the second as soon as the first coat has dried approx. 12 hours at 20°C. Allow to cure for a minimum of 12 hours at 20°C before allowing light foot traffic. Always consult the manufacturer’s technical datasheet prior to use.
- Anglo Slip-Resistant Grade Floor Paint
- Single pack polyurethane formulation
- Can be used internally and externally
- Fine anti-slip aggregate
- Dust sealing
- Easy Cleaning
- Available in 4 colours
- Theoretical coverage of 8m2 per litre per coat
- Do not apply to asphalt, PVC, thermoplastic tiles, latex levelling compounds or to surfaces subject to rising damp
- Always consult the manufacturer’s technical datasheet prior to use
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.