Bradite Low Slip Aggregate SA12 is a soft feel polypropylene bead additive providing additional under foot traction to Bradite floor coatings.
Bradite Low Slip Aggregate SA12 used in conjunction with Bradite floor paints requiring a hard wearing softer feel low slip additive. Especially suited for when bare skin contact is likely thus reducing chance of discomfort or grazing that may occur with mineral aggregate alternatives.
Consult technical data sheet for the specific Bradite floor paint product for recommendations.
Direct incorporation method: Bradite Low Slip Soft Aggregate SA12 should be added to the paint and mixed thoroughly just before use at a rate of 1 x 250ml SA12 tin (110g) per 5 litre of paint.
Hand broadcast method: Bradite Low Slip Soft Aggregate SA12 should be scattered over the first coat while it is still wet at a rate of 0.2 - 0.5 kg/m2. When dry, excess low slip additive should be brushed off before application of the final coat. The end user and applicator must ensure that the finished floor is safe against slips in all likely usage conditions.
|Tintable:||No. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For use with Bradite Polyurethane Floor Paint|
|Application Method:||Broadcast or Direct Incorporation To Paint|
|Theoretical Coverage:||0.01 to 0.5 Kg per m2|
|Particle Size:||Approx 0.1mm|
|Shelf Life:||Almost unlimited if unopened in original packaging|
|Packaging:||Available in 250ml|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.