PPG Sigma Anti-Slip Aggregate is a floor coating additive, produced in fine and medium grades to offer non-slip properties to many floor paints as well as Sigma Floor Coatings.
PPG Sigma Anti-Slip Aggregate is best used in areas that are prone to getting slippery or in areas exposed to wet and moisturous conditions and works to protect people from slipping, which could potentially cause injury.
- Hard aluminium oxide aggregate with excellent abrasion resistance
- Suitable for marine and offshore for main decks, helidecks, walkways and other areas with heavy traffic
- Suitable for use in combination with flooring products
- Provides a heavy non skid surface
- Blend of 16 and 36 mesh aluminium oxide (average 24 mesh - 0.7mm)
PPG Sigma Anti-Slip Aggregate can applied to the wet coating by sprinkling on the surface once the floor paint has been applied or by mixing the aggregate into the substance prior to application. Add slowly to paint using mechanical agitation. Mix frequently to avoid settling. Apply with a mastic spray or a short nap roller. Alternatively sprinkle open or full into wet film of the epoxy or flooring product.
Surface and Environment
PPG Sigma Anti-Slip Aggregate can be used on a variety of different surfaces internally or externally, primarily concrete and power floated floor surfaces which have been suitably primed and require a non slip coating.
- Offers non slip properties to many types of floor paint
- Colour: Aluminium Grey
- Available in fine or medium grade
- Available in 5 or 25 Kg packs
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.