Centrecoat Slip Resistant Floor Treatment ensures that with just one simple application, slippery surfaces become low-slip instantly. Centrecoat Slip Resistant Floor Treatment can be applied to mineral surfaces, ceramic tiles, concrete, terrazzo, tiles. The process does not materially alter the nature of a surface. Use in factories, communal areas, nursing homes, entrance halls, gyms, swimming pool surrounds, kitchens, showers and anywhere the floors are slippery, especially when wet. Centrecoat Slip Resistant Floor Treatment is a revolutionary product that grafts new molecules on the existing ones.
Centrecoat Slip Resistant Floor Treatment is used to provide surfaces with a non slip finish, especially floors, where accidents and injuries are likely to occur if the surface is left untreated. Slippery surfaces have until recently been commonly treat with hydrofluoric acid, this works well to provide a surface with an anti slip finish but unfortunately dissolves some of the floors properties. Centrecoat Gloss works in the opposite way in that it builds more silicon when chemically reacting with the surface. This acts as an anti slip surface that won't cause damage to the floor.
Centrecoat Slip Resistant Floor Treatment can be applied by pouring or spraying the product onto a clean and dry surface, applying it with the assistance of a brush or a low-pressure spray. Make sure the product stays present over the complete surface during the treatment. Add more Centrecoat Slip Resistant Floor Treatment product if necessary, if you find you haven't used the appropriate amount to start with.
Centrecoat Slip Resistant Floor Treatment can be bought in 1 and 5 litre containers and offers a theoretical coverage rate of 10-30m2 per litre depending on the surface.
Maintenance: Centrecoat Slip Resistant Floor Treatment can be used diluted, up to 20% with water, as part of a cleaning maintenance of the surface. This would be carried out as viewed appropriate depending on the degree and type of foot traffic as well as the substrate material.
Centrecoat Slip Resistant Floor Treatment can be used indoors or outdoors to produce an anti slip surface that will not catch fire and is does not contain any acids that could be hazardous or harmful. Centrecoat Slip Resistant offers long lasting effects and can be used on mineral surfaces, ceramic slabs, concrete, marble, terrazzo, tiles and enamel to name a few.
|Type:||Water Based Alkali|
|Physical State at 20°C:||Liquid|
|Suitable Substrates:||Concrete, Terrazo Slabs, Slabs, Porcelain Tiles, Polished Granite|
|Application Method:||Brush, Roller, Airless Spray or Air-Atomised Spray|
|Theoretical Coverage:||10 - 30 m2 per litre depending upon surface|
|Cleaner / Thinner:||Clean equipment with clean warm water|
|Shelf Life:||24 months from the production batch date when kept in the original unopened container|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.