Teamac Suregrip Anti-Slip for Deck and Floor

SKU
id650
UN1263 (Class: 3, Pk Grp: III)
Suregrip designed for boat decks as a non-slip safety coating on domestic and commercial floors, stairs and walkways, inside or outside.
Available in 2.5 and 5 Litres
From £63.55 £52.96
In stock
Product Description

Teamac Suregrip Deck and Floor Paint is an aggregated deck coating which provides a rough anti-slip finish.

Teamac Suregrip Deck and Floor Paint is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry. Designed for boat decks but also ideally suitable as a non slip safety coating for use on domestic and commercial floors, stairs and walkways inside or outside where a sure foothold is required.

Best Uses

Teamac Suregrip is a safety coating designed for INSIDE and OUTSIDE use, where a sure foothold is required. Suitable for foot or light truck traffic, Teamac Anti-slip for Deck and Floor can be used on wood, metal, concrete, GRP and other suitably prepared surfaces to ensure a slip-resistant surface.

Application

Teamac Anti-Slip Deck and Floor Paint should be applied using brush or roller. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Teamac Anti Slip requires 2 coats to get the desired effect. After 6 hours the paint will be touch dry and recoatable after 16 hours. Full hardness is achieved in between 5 and 7 days.

Surface/Environment

When using on Boat Decks, Suregrip is suitable for metal, wood or glass fibre boat and yacht decks. When using as a non slip floor paint, Suregrip is suitable as a non slip coating on floors, stairs and walkways (inside or out). Suregrip is a safety system that provides footing and grip in various different areas. Boats are an ideal place to use Suregrip as there is a constant need to prevent slipping.

Technical Details
Components: One Part
Type: Modified Alkyd
Finish: Aggregated
Stock Colours: Red, White, Black, Grey, Buttermilk, Cornflower Blue, Green, Yellow and Light Grey
Tintable: No
VOC Content: 343.0g per Litre
Volume Solids: 58 - 62%
Suitable Substrates: For wood, metal, concrete, GRP and other suitably prepared surfaces
Application Method: Brush, Short or Medium Pile Roller
Theoretical Coverage: 6 - 10 m2 per litre at 60 - 100 microns
Wet Film Thickness (WFT): 100 - 150 microns
Dry Film Thickness (DFT): 60 - 100 microns
Induction Time: -
Pot Life: -
Touch Dry: 6 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Teamac Thinners 14
Shelf Life: 2 years unopened in original container
Packaging: Available in 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use