Protecta-Kote Safekote anti-slip coating with a silica additive is an ideal slip resistant paint for wood, metal, some plastics and fibreglass.
Protecta-Kote Safekote has been formulated to provide an attractive anti-slip coating - with a uniform silica additive making this single component an ideal slip resistant paint coating for substrates such as wood, metal, some plastics and fibreglass. Safekote is a low profile non-slip paint suitable for exterior and interior applications to boats, decking, shower trays, steps, ramps, laminate flooring and any area where an anti-slip surface is required. Dry samples are available on request.
Protecta-Kote Safekote is a moisture-cure, aliphatic, polyurethane composition that provides ease of application with an extremely abrasion and weather resistant film. This product has an attractive, non slip, low gloss finish which is easy to clean and maintain. Safekote offers attractiveness and is available in standard marine colours that will not fade or yellow from UV radiation, although safety colours and other colours are available on request.
Safekote is an anti-slip paint, ideal for Steps and Walkways, Bathrooms, Ramps, on slippery floors exposed to water such as Showers, Change Rooms and Ablution Blocks.
Clear Safekote is ideal for providing an anti-slip coating on surfaces such as marble, wood or any other substrate with an aesthetic surface.
Not suitable for application to polypropylene. Call our technical team to check if your substrate is suitable for this product.
Protecta-Kote Safekote can be applied by brush , roller or spray and is extremely easy to apply with fast drying capabilities. Once applied the coating will be suitable to be walked on or driven over after just 4 hours, offering a theoretical coverage rate of 3-4m2 per litre.
Protecta-Kote Safekote can be applied to wood, laminate, fibreglass and most other common flooring substrates and is ideal for use on boat decks, steps, walkways, jetties and ramps. This abrasion resistant coating offers protection against diesel, petroleum and many other solvents and acids.
|Stock Colours:||See colour card|
|VOC Content:||250.0g per Litre|
|Suitable Substrates:||For steel, galvanized iron, aluminium, concrete, fibreglass, pvc, rubber, glazed tiles, motor vechiles and painted metal|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||5 - 6m2 per litre per coat. Applied in a 2 coat application. Giving an overall coverage of 2½ - 3 m2 per litre.|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||Two coats will result in a final dry film thickness of 0.35 - 0.47mm|
|Touch Dry:||60 - 90 minutes at 25ºC and 70% relative humidity|
|Overcoatable:||60 – 90 minutes at 25ºC and 70% relative humidity|
|Fully Cured:||3 - 4 days at 25ºC to reach final strength|
|Cleaner / Thinner:||Xylene|
|Shelf Life:||18 months|
|Packaging:||Available in 1 and 4 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.