Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Centrecoat Aquamide is a heavy duty floor paint used in areas of high traffic, warehouses, showrooms and other areas which require heavy commercial or industrial use.
Centrecoat Aquamide is a water based, two pack floor paint which is excellent for high traffic or hygiene areas. Suitable for the addition of differing grades of aggregate to produce an anti slip finish for any application. Centrecoat Aquamide floor paint offers you a highly durable finish, suitable for use where pedestrian levels are high. Before use of this product, please ensure that the surface is dry and clean. Once applied, Aquamide contains PTFE to enable easy cleaning and is available in a selection of colours.
Centrecoat Aquamide is best used in areas of high traffic, warehouses, showrooms, car parks, and a whole host of various other areas which require heavy commercial or industrial use. This heavy duty epoxy floor paint can be used on most prepared/primed substrates, the best of which would be concrete. Aquamide provides you with a hard wear coating for long term protection that we can guarantee you will not be disappointed with.
Centrecoat Aquamide should only ever be applied to clean and dry surfaces and can be applied in various different ways. We would recommend using a roller for a smoother finish, however you can also apply Centrecoat Aquamide using a brush, airless spray or conventional spray. Do not apply Centrecoat Aquamide to a surface where room temperature is below 8°C. Where room temperatures are higher, then drying time will reduce significantly.
Centrecoat Aquamide is designed for use in many different environments where a high level of heavy duty activity occurs. Where there are people, there are hazards, and whatever the circumstance, hazards need to be kept to a minimum. Aquamide has been specially designed to be suitable for the addition of different grades of aggregate. By adding these aggregates, once the paint is dry, the surface will be produced with a high quality anti slip finish, perfect for any area with a high population of use.
- A 2 pack epoxy floor paint
- Water based
- Low odour
- Highly durable
- Fast drying
- Contains PTFE to enable easy cleaning
|Stock Colours:||Only tints|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangable.|
|Suitable Substrates:||For labs, warehouses, garages, factory walkways & any other areas of high traffic|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||Approx 8 m2 per litre depending on substrate (two coats required)|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||8 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||6 months unopened. Store between 5 & 25°C. Always replace lid after use|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.