Rustoleum-Mathys B95 High-Build Flexible Epoxy Structural Steel Paint designed to offer outstanding corrosion protection in coastal and industrial areas. Rustoleum-Mathys B95 High-Build Flexible Epoxy is virtually solvent free, making it ideal for interior use as well as the preferred external use.
Rustoleum-Mathys B95 High-Build Flexible Epoxy Paint is best used on Structural Steel to protect it from the long term and short term effects of corrosion and the damages that come with the industrial environment. B95 is extremely wear and impact resistant along with excellent flexibility, allowing it to move with the structure without cracking, flaking or peeling.
Rustoleum-Mathys B95 High-Build Flexible Epoxy is available in Steel Grey, Pastel Green, Light Grey and Dunes Tan and is primarily intended for airless spray application, however can be applied using brush or roller for smaller trickier areas or touch ups. Rustoleum-Mathys B95 High-Build Flexible Epoxy is dry to touch after 8 hours and can be recoated after 24 hours if necessary, of course these times depend on warm drying conditions of approximately 20°C.
Surface and Environment
Rustoleum-Mathys B95 High-Build Flexible Epoxy has been manufactured to be used in light to heavy industrial exposures where the need for resistance is an essential. B95 can be applied to structural steel and works to protect against weathering, UV light damage, impact, chemicals and abrasion. Rustoleum-Mathys B95 High-Build Flexible Epoxy Paint can be used on concrete, masonry, or galvanised steel for a decorative and protective coating.
- Rustoleum-Mathys B95 High-Build Flexible Epoxy
- Outstanding corrosion protection in coastal and industrial areas
- For hand cleaned, blasted steel, primed or galvanised steel, concrete and brickwork
- Virtually solvent free industrial paint
- Surface tolerant
- Excellent wear and impact resistance
- Flexible, moves with structure
- Easy mixing (1:1 ratio)
- Also available as a self levelling flexible epoxy coating for floors (B95SL)
|Type:||Solvent based Hi Build Epoxy|
|Stock Colours:||Light Grey, RAL 7001 Steel Grey|
|VOC Content:||16.0g per Litre|
|Suitable Substrates:||For concrete, masonry, and hand tool prepared, blasted, primed or galvanized steel|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||6.6 m2 per litre|
|Wet Film Thickness (WFT):||150 microns|
|Dry Film Thickness (DFT):||150 microns|
|Induction Time:||15 minutes at 20°C|
|Pot Life:||45 minutes for a 10L mix at 20°C|
|Touch Dry:||8 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||8 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.