Jotun Jotamastic 90 Alu B15

SKU
id17037
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469 (Class: 3, Pk Grp: III), Part B WG: UN1866 (Class: 3, Pk Grp: III)
A two component coating for use in atmospheric and immersed environments.
Available in 5 and 20 Litres in Aluminium
From £92.98 £77.48
In stock
Only %1 left
Product Description

Jotamastic 90 Alu B15 is recommended as a highly protective coating for use within atmospheric and immersed environments and can be used in sub-zero temperatures if using the winter grade version.

BBA Approval Logo

Jotamastic 90 Alu B15 is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistant, high solids high build and aluminium pigmented paint. It is idealy suited for areas where blasting the surface is not possible and only the minimum of preparation can be achieved.

Jotamastic 90 Alu B15 offers long lasting protection within environments where protection against high corrosivity is essential.

Best Uses

Jotamastic 90 Alu B15 is suitable as a primer, mid coat, finish coat or as single coat system. It is ideal for use in atmospheric and immersed environments. Jotamastic 90 Alu is for use on properly prepared carbon, galvanised or stainless steel, aluminium, concrete and a range of aged coating surfaces.

Jotamastic 90 Alu B15 is recommended as a highly protective coating for use within atmospheric and immersed environments. It is approved to meet the requirements of UK Highway Agency Item No.115, for use on bridges and highway infrastructure. It is also approved by Network Rail/Railtrack.

Also available in Winter Grade version.

Application

It is recommended that Jotamastic 90 Alu B15 is applied with an airless spray, although brush application can be used for stripe coating or small areas. A roller may be used for small areas but is not recommended for the first primer coat. Care must be taken, during roller and brush application, to ensure the necessary dry film thickness.

Surface and Environment

Jotamastic 90 Alu B15 can be applied at sub zero surface temperatures and a standard or winter grade hardener may be used. Jotamastic 90 Alu provides long lasting protection in environments with high corrosivity. It is suitable for properly prepared carbon, galvanised and stainless steel and also for aluminium, concrete and a range of aged coated surfaces.

Recommended use

Technical Details

Approval

  • This product is part of the Network Rail/Railtrack RT98 Systems M20 and M24
  • Highways agency approved Item No. 115
  • Certificate numbers XM92/M20-168 and XM92/M24-170

Technical Info

Components: Two Part
Type: Polyamine cured epoxy mastic coating
Finish: Semi Gloss
Stock Colours: Aluminium
Tintable: No
VOC Content: 250.0g per litre
Volume Solids: 76%
Suitable Substrates: Properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces
Application Method: Airless Spray or Brush
Theoretical Coverage: 7.6 - 2.5m2 per litre
Wet Film Thickness (WFT): 125 - 375 microns
Dry Film Thickness (DFT): 100 - 300 microns
Induction Time: -
Pot Life: 2 hours at 23°C
Touch Dry: 12 hours at 10°C
Overcoatable: 10 hours at 10°C
Fully Cured: 14 days at 10°C
Cleaner / Thinner: Jotun Thinner No. 17
Shelf Life: 48 months
Packaging: Available in 5 and 20 Litres

Related Products