Bedec Frosting Varnish to Obscure Window Glass creates a high quality etched, tinted or obscure effect on clear glass or plastic.
Bedec Frosting Varnish to Obscure Window Glass is a low toxic, high quality acrylic based varnish. used to obscure and tint windows. Frosting Varnish to Obscure Window Glass can be used to create a stain glass effect or an etched effect that obscures visibility on the window surface; increasing privacy, where needed.
Bedec Frosting Varnish to Obscure Window Glass is best used on glass and clear plastic windows to create an obscure effect, and can be tinted to create a stained glass effect. Frosting Varnish (to Obscure Window Glass), is part of Promain's range of Decorative Glazes and can be used to create a blurred effect on any clear window.
Bedec Frosting Varnish to Obscure Window Glass is applied by brush, roller or sponge and cannot be applied to surfaces when temperatures are less that 8°C. Bedec Frosting Varnish has a theoretical coverage rate of 6-8m sq. and can be purchased in 1 litre bottles, for small/medium sized projects.
Surface and Environment
Bedec Frosting Varnish has been specifically designed to Obscure Window Panes made out of glass or plastic. Frosting Varnish to Obscure Window Glass should be used internally and will create a high quality etched, tinted or obscure effect.
- Bedec Frosting Varnish to Obscure Window Glass
- A low toxicity, high quality acrylic based varnish
- For use on glass or clear plastic to give the effect of etched or obscure glass
- Can be tinted to give a stained glass effect
- Apply by brush, roller or sponge
- Coverage approximately 6-8 sq. meters per litre
- Glass or plastic must be at least 8°C, when applying
- Dry in 1 hour at 18°C and 65% humidity
- Available in 1 litre bottle
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.