Blackfriar Cleaner and Degreaser has been specifically designed to remove oil and grease from floor surfaces prior to etching. Works at a high level to get rid of these stains as quickly as possible.
Blackfriar Cleaner and Degreaser is an essential product used to achieve the perfect surface and has been highly recommended among professionals in an industrial environment that constantly deal with spillages and stains, caused by oil and grease.
Blackfriar Cleaner and Degreaser is a clear liquid that will not impact the surface when applied to remove oil and grease. This product is so simple to apply using a lint free cloth and scrubbed into the surface to bring out the stain. All the Excess can then be removed quickly using clean, hot water.
Surface and Environment
Blackfriar Cleaner and Degreaser can be used indoors or outdoors on concrete and screed floors in an industrial environment or domestically on driveways and paths where oil and grease is causing an unsightly appearance. This cleaning device offers users a powerful cleaning solution to get rid of contamination in a variety of different environments.
- A concentrated, heavy duty, degreaser and cleaner that removes impacted oil and grease from floors and other cementitious surfaces prior to etching.
- An essential part of the cleaning process and highly recommended for achieving the best possible finish.
- Powerful cleaning action for oil and grease contamination
|Type:||Cleaner / Degreaser|
|Suitable Substrates:||For interior and exterior concrete, metal and other oily surfaces|
|Application Method:||Lintless Cloth|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||-|
|Shelf Life:||2 years in unopened original packaging|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.