Updating your kitchen doesn’t have to be an overly ambitious and expensive task that takes up your whole weekend. Among the many techniques to polish or add a fresh look and functionality to your kitchen, repainting the cupboards is one of the tactics that can be the easiest and least…

A task such as painting over older wallpaper is one that can be rather time-consuming; however, it can also be cost-effective at the same time. Before beginning the actual process, it’s important that you first invest in a wallpaper cover-up paint, as this will work better than a basic interior…

When you are looking to paint over outdoor graffiti you will need to choose a product that both primes and seals the wall that you need to paint over. This will ensure that any stains from underneath the paint do not start to resurface in the future. Before the surface…

If you or someone you know is currently looking for a way to cover up nicotine stains on walls, here are some useful steps that you should make note of! Preparing the Surface Ensure that any surface that you plan to work with is completely clean, dry, and free of…

This guide explains how to paint over mould and mildew stains and prevent them from returning, while achieving a decorative finish. Surface Preparation Make sure all surfaces are clean, dry and free of anything that may prevent adhesion. Remove any loose or unstable material by scraping or brushing with a…

The first step you should take when stripping a deck is to do a spot test. Which means you can apply the stripper to a small area to see how long it takes for the coating to actually lift off the surface. This will save time in the long run…

To decide what type of wood stripper you need you first need to know what type of coating you will be removing. This is important to know since different strippers are made to take off different types of coating. There are seven main coatings that you could be looking to…

When a person is learning about wood stripping, Owatrol is one of the best places to start. Ultimately, the product needed for the job will depend on the wood and the specific stripping job that is being done. With that said, we have taken the time to look at the…

If you have decking that is a lot newer, then chances are the wood itself will have mill glaze. This means that any and all finishes will be prevented from being adhered to the surface correctly and you should prepare the pores of the timber itself before attempting to apply…

If mould has started to form unsightly patches on walls or ceilings in the cold, damp winter months, then here is an easy guide to getting rid of mould altogether. The worst thing you can do is try to paint over the top of mould in an attempt to hide…