This product has now been discontinued. Please contact our technical team for a suitable alternative.
A non-toxic, biodegradable, cleaning agent which gently neutralises and absorbs deeply ingrained stains and enables removal by rinsing with water
Boat Buddy Gelcoat Stain Remover (formerly known as Marine Surface Cleaner) is a non toxic, biodegradable cleaning agent which gently neutralises and absorbs deeply ingrained stains and enables them to be removed by rinsing with a sponge and water.
Boat Buddy Gelcoat Stain Remover is best used for re-creating a the original aesthetics of a surface, restoring it to a natural high gloss finish. Gelcoat Stain Remover can be used to clean all dirt and contamination from the exterior of marine applications such as yachts and boats, helping to restore a natural shine to the surface.
Boat Buddy Gelcoat Stain Remover can be applied, directly to stains, by brush or sponge. It works by neutralising them, ready for removal with salt water or fresh water. Once the Gelcoat Stain Remover has absorbed the contamination it is easy to remove and rinses off quite readily.
Surface and Environment
Boat Buddy Gelcoat Stain Remover can applied to all stains found on marine surfaces, including yellow waterline and rust stains and bird lime too. Gelcoat Stain Remover is a high quality formulated product that provides a brilliant effect and is highly recommended among boat users across the country.
- Restores older, faded and dull surfaces to the original high gloss shine and deep lustre
- Does not contain harsh oxalic, muratic or hydrochloric acids
- Removes waterline, rust and exhaust stains, bird lime and general off-white discolouration
- Gel formulation adheres to vertical and overhead surfaces
- and used neat, to enable it to adhere to vertical and overhead surface
- Absorbs and neutralises stain
- Washed off with salt water or fresh water
- Safe for use on most surfaces
- Biodegradable and water soluble
- Available in 1 litre container
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.