Bradite Bitumen Coat/Finish is a solvent thinned high build bitumen coating and finish paint, for walls, structural steel, galvanised substrates, concrete and brick.
Bradite Bitumen Coat/Finish BB58 is best used as a fast drying application to a variety of substrates for providing excellent water resistance. It can be used on all suitably primed ferrous & non-ferrous metals, concrete, brick, asphalt and felt roofing which are dry, free of contamination and dust. Compatibility with existing coatings should be confirmed by preparing and painting a test area. Not recommended for ornamental fish ponds.
This is also available as a silver version (BS59), which also offers solar reflective insulation properties.
Application and use should always conform to the codes of practice described in BS 6150 and BS 5493.
High pressure steam clean to remove all loose, flaking paint and contamination back to a sound surface. Scrub the area with Bradite TD39 industrial strength detergent, wash and rinse to remove grease or oil. Remove all rust scale, loose mill scale or other corrosion products by scraping and mechanical cleaning to
SIS-St 3 (ISO 8501-1:1998). Intact areas of existing coatings should be roughened by abrasive manual or disc sanding, feathering back to a sound coating edge. Cracks and pits should be filled using a suitable metal filler before painting. Substrate should be dust free and completely dry before coating.
Certificates & Approvals
- Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
- Confirms to BS 3416 and BS6949, Type 1 Class A.
- Tough hard-wearing film.
- Excellent water resistance.
- Suitable for water immersion (not drinking water or fish ponds).
|Type:||Solvent Thinned Bitumen Coating|
|VOC Content:||500 g/L|
|Suitable Substrates:||Suitably primed ferrous & non-ferrous metals, concrete, brick, asphalt and felt roofing|
|Application Method:||Brush, Roller, Airless Spray or Conventional Air Spray|
|Theoretical Coverage:||16 m2/L/coat|
|Wet Film Thickness (WFT):||64 microns/coat|
|Dry Film Thickness (DFT):||30 microns/coat|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||After 16 hours minimum at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Bradite Thinner TW35|
|Shelf Life:||12 months minimum in original unopened containers.|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.