Bradite Epoxy Barrier Primer EU96 is a high performance two pack epoxy solvent based barrier primer for ferrous and non-ferrous metals. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems. Conforms with parts KU1 A/B of B5493.
Bradite Epoxy Barrier Primer is best used as a barrier primer for suitably prepared steel and non-ferrous substrates. It provides outstanding adhesion and excellent corrosion protection. It may also be used as a wet blast primer and for immersion application when part of a suitable coating system.
For internal & external steel & non-ferrous substrates which are dry, free of contamination and have been properly prepared.
Application and use should always conform to the codes of practice described in BS 6150 and BS 5493.
Brush and Roller – supplied ready for use. Thin, if required, with 0 - 5% Bradite Thinner TE36.
Conventional Air Spraying - Thin with 10 - 25% Bradite Thinner TE36 as required, tip size – 23 thou (1.7mm), tip pressure 60psi (0.4MPa) approximately.
Airless Spraying - Thin with 0 - 25% Bradite Thinner TE36 as required, tip size - 18 thou (0.46mm) approximately, tip pressure - 2100 psi (15MPa) approximately.
- Suitable as a primer for a wide range of coatings, also suitable as a wet blast primer.
- Can be used in immersion conditions.
- Conforms with parts KU1 A/B of B5493.
|Finish:||Eggshell (approx. 20%)|
|VOC Content:||429 g/L|
|Volume Solids:||50% (mixed)|
|Suitable Substrates:||Steel and non-ferrous substrates|
|Application Method:||Brush, Roller, Airless Spray or Air-Atomised Spray|
|Theoretical Coverage:||10 m2/L/coat|
|Wet Film Thickness (WFT):||100 microns/coat|
|Dry Film Thickness (DFT):||50 microns/coat|
|Pot Life:||14 hours at 20°C|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 8 hours minimum to maximum of 3 months at 20°C|
|Cleaner / Thinner:||Bradite Thinner TE36|
|Shelf Life:||12 months minimum in original unopened containers|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.