Bradite Low Slip Aggregate SA14 is a hard silica quartz aggregate additive providing additional under foot traction to floor coatings.
Bradite Low Slip Aggregate SA14 should be used in conjunction with Bradite floor paints requiring a hard wearing low slip additive. Suitable for use with Bradite Polyurethane Floor Paint.
This additive may be incorporated into the paint by two alternative methods, depending upon the requirements of the end application. Direct incorporation provides for a more even appearance on large areas, whereas hand broadcast may be preferred for smaller sections such as the tread surface of steps.
Direct incorporation method: Bradite Low Slip Aggregate SA14 should be added to the paint and mixed thoroughly just before use at a rate of 1 x 250ml SA14 tin (375g) per 5 litre of paint.
Hand broadcast method: Bradite Low Slip Aggregate SA14 should be scattered over the first coat while it is still wet at a rate of 0.5 - 1.0 kg/m2. When dry, excess low slip additive should be brushed off before application of the final coat.
The end user and applicator must ensure that the finished floor is safe against slips in all likely usage conditions.
|Type:||Hard Silica Quartz Aggregate|
|Stock Colours:||Light Cream|
|Tintable:||No. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For use with Bradite Polyurethane Floor Paint|
|Application Method:||Broadcast or Direct Incorporation To Paint|
|Theoretical Coverage:||0.25 to 1.0 Kg per m2|
|Particle Size:||Approx 0.1mm|
|Shelf Life:||Almost unlimited if unopened in original packaging|
|Packaging:||Available in 250ml|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.