Bradite Pre-Treatment for Galvanised Steel is an acid base in water and water miscible solvents designed as a pre-treatment for galvanised steel. British Gas reference BGX M01. Department of Transport Item No. 155.
Bradite Mordent Solution is used as an application to galvanised steel to modify the metal surface allowing improved adhesion of subsequent coatings.
Galvanised steel surface should be cleaned & degreased using Bradite Degreaser TD39 or steam cleaning, before application of Bradite Mordant solution TM38. Apply evenly using a soft brush and allow approximately 20 minutes to react. Reaction progress is indicated with a colour change to an even dark grey or black.
After the reaction has taken place the surface should be thoroughly rinsed with clean water. Treated surfaces should then be allowed to thoroughly dry prior to all subsequent painting operations.
Brush - supplied ready for use.
Spraying - this product should not be sprayed under any circumstance.
Cleaning - Clean all equipment immediately after use with clean water for best results.
- Provides a key for all paint primers and finishes.
- Clean up with water after use.
- British gas reference BGC MO1.
- Department of Transport Item NO:155.
- Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
|Type:||Acid base in water and water miscible solvents|
|Stock Colours:||Pale Blue|
|VOC Content:||0 g/L|
|Suitable Substrates:||Galvanised steel|
|Application Method:||Brush or Spraying|
|Theoretical Coverage:||20 m2/L|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Flash Point (Abel closed cup)||30°C|
|Shelf Life:||6 months minimum in original unopened containers|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.