Bradite Thinner TB34

SKU
id18613
UN1263 (Class: 3, Pk Grp: I)
a low flash point solvent to thin etching primers and chlorinated rubbers from Bradite.
Available in 2.5 and 5 Litres
From £20.27 £16.89
In stock
Only %1 left
Product Description

Bradite Thinner TB34 is a low flash point solvent to thin etching primers, select chlorinated rubber paints and can also be used for equipment cleaning.

Best Uses

Bradite Thinner TB34 is used to thin etching primers, selected chlorinated rubber paints and can also be used for equipment cleaning.

This product is suitable for use with:

Please refer to each products data sheet for details regarding mixing ratios and application. Always refer to the Health and Safety sheet for the product before use, and observe the warning phrases on the label.

Technical Details
Components: Single Pack
Type: Thinner
Density: 0.81 kg/L
Tintable: No.
VOC Content: 806 g/L
Volume Solids: -
Suitable Substrates: For thinning etching primers and select chlorinated rubber paints
Application Method: Brush
Flash Point (Abel Closed Cup) -4°C
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Cleaner / Thinner: -
Shelf Life: 12 months minimum in original unopened containers
Packaging: Available in 2.5 Litres and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use