Fosroc Dekguard E2000

SKU
ID25414
Non Hazardous
A single pack, water based, crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures.
Available in 10 Litres in White
From £290.68 £242.23
In stock
Only %1 left
Product Description

Fosroc Dekguard E2000 is a single pack, water based, crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures.

Best Uses

Fosroc Dekguard E2000 is formulated to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there is a danger of subsequent cracks appearing within the substrate. Dekguard E2000 is suitable for use on all types of structures, including those in coastal environments.

  • Can accommodate substrate cyclic movement of up to 0.3mm
  • Excellent barrier to carbon dioxide, chloride ions, oxygen and water
  • Special acrylic polymer minimises dirt retention
  • Allows water vapour to escape from the structure
  • Resistant to the effects of ultra-violet light
  • Water-based
  • Range of decorative colours

System

The Dekguard E2000 system comprises a single component primer and a single component elastomeric pigmented coating, both ready for immediate site use.
The choice of primer (Nitobond AR or Dekguard CP) depends on performance requirements.

Technical Details

System

Dekguard CP (Priming option 1)

  • Number of coats: 1
  • Theoretical application rate: 0.25 litres/m2
  • Theoretical wet film thickness: N/A
  • Overcoating time: 6 hours @ 20°C

Nitobond AR (Priming option 2)

  • Number of coats: 1 or 2
  • Theoretical application rate per coat: 0.15 litres/m2
  • Theoretical wet film thickness per coat: N/A
  • Overcoating time: 6 hours @ 20°C

Dekguard E2000

  • Number of coats: 1
  • Theoretical application rate: 0.4 litres/m2
  • Theoretical wet film thickness: 400 microns

Technical Info

Components: Single Pack
Type: Water Based
Finish:  
Stock Colours: White
Tintable: No
VOC Content: 5 g/L
Volume Solids: 50%
Suitable Substrates: Reinforced Concrete and Masonry
Application Method: Brush, Roller or Spray
Theoretical Coverage: 2.5m2 per litre
Wet Film Thickness (WFT): 400 microns
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Surface Dry: 16 hours at 20°C
Overcoatable:  
Fully Cured:  
Cleaner / Thinner: Dekguard E2000, Dekguard CP and Nitobond AR should be removed from tools and equipment with clean water immediately after use.
Shelf Life: 18 months if kept in a dry store in the original, unopened packs
Packaging: Available in 10 Litres

Related Products