Please note, this product has an expected delivery lead time of 4 weeks.
Mapei Antipluviol is a colourless water-repellent impregnation treatment based on silicon compounds in water solution.
Mapei Antipluviol is best used as a colourless protection against rain of exposed concrete structures, cement renders, cellular cement, face bricks, exposed concrete blocks, natural and artificial stone etc. Mapei Antipluviol can be also used to repair plastered walls exposed to rain or to protect period buildings or those of special architectural value.
Remove all dirt, dust, grease, oil, paint, salt laitance, moss and weeds from the surface that may prevent Antipluviol from penetrating deeply. Antipluviol should only be applied to dry surfaces. Application is recommended via a backpack spray gun onto large areas or roller / brush onto small areas. Once Antipluviol has been applied, the surface cannot be painted.
- This product is unsuitable for horizontal surfaces, basements, water tanks, walls subject to damp carrying salts, lift wells or areas subject to water under pressure, gypsum surfaces, or synthetic plasters and surfaces decorated with synthetic paint.
- Carry a test first on a small, hidden area.
- UV resistant
- No need to dilute
- Do not apply Antipluviol if the level of humidity is higher than 85%
|Suitable Substrates:||For concrete structures, cement renders, cellular cement, facebricks, exposed concrete blocks, natural and artificial stone, etc.|
|Application Method:||Brush, Roller, Backpack Sprayer|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Cleaner / Thinner:||Water|
|Shelf Life:||Can be stored for 24 months a dry place, well away from flames and sources of heat at a temperature between +5°C and +30°C. Protect from frost.|
|Packaging:||Available in 5 and 25 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.