Remmers Funcosil FC is an impregnation cream on a silane/siloxane base in emulsion form. High active ingredient content of 40%. Highly water repelling, easy to apply, less material needed, no running, no aerosols. Can be applied with a roller, brush or by airless spraying and can be worked overhead.
Funcosil FC is best used for hydrophobizing impregnation of porous, cementitious building materials such as brick, clinker, sand-lime brick, render, natural stone and fibrated cement. It is rain tight approximately 60 minutes after application, and is not sensitive to frost.
Please note this product is not suitable for dense building materials such as marble, granite or cleaving tiles.
Remmers Funcosil FC is applied by roller (long-haired lambskin roller), brush or airless equipment. Depending on the absorbency of the substrate, application rates of up to 0.2 l/m² can be applied in one working operation even on vertical surfaces and ceilings without a loss of material.
Working temperature: Hydrophobizing impregnation is preferably carried out at temperatures between +5 °C and 25 °C. Sun awnings can be used to prevent surfaces from heating too strongly. At temperatures below 10 °C, evaporation of the carrier and formation of the active ingredient may be considerably delayed.
To prevent constituents in the product from entering the building, close all windows, doors and other openings during impregnation work; after the impregnation agent has dried, ventilate living space thoroughly.
|Active Ingredient Content:||Approx. 40 % by mass|
|Density:||Approx. 0.84 kg/l|
|Suitable Substrates:||Brick, Sand-lime Brick, Mineral Render|
|Application Method:||Brush, Long Hair Lambskin Roller or Airless Spray|
|Theoretical Coverage:||Approx 0.15 to 0.20 l/m² depending on porosity|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Rain Tight:||Min. 1 hour or after the cream has been completely absorbed|
|Testing:||Testing should be carried out at the earliest 6 weeks after the hydrophobizing measures, and the results recorded|
|Cleaner / Thinner:||Clean tools thoroughly with water|
|Shelf Life:||12 months unopened|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.