Centrecoat Grip Fast

SKU id24322 Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)
A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.
Available in 5m2 Packs
£60.00 (£72.00 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£60.00 (£72.00 Inc VAT)

Product Description

Centrecoat Grip Fast is a single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.

Best Uses

Centrecoat Grip Fast is the ideal solution for covering concrete, wood and metal floors with a slip resistant finish. Ideal for covering areas of warehouse floors to highlight walkways, safety areas or packing zones for easy identification. Centrecoat Grip Fast is also ideal for the infill of concrete parking bays such as electric car charging points, disabled bays and family parking.

  • Solvent free, low odour
  • Excellent slip resistance
  • Tough and durable
  • Easily applied
  • Hygienic and easily cleaned
  • Good chemical resistance

Centrecoat Grip Fast is supplied in composite packs, each containing sufficient material to provide a slip-resistant epoxy coating system for 5 square metres of surface. Centrecoat Grip Fast is applied in a single coat operation which reduces the curing period of the system prior to trafficking. Apart from the excellent slip resistance characteristics, the coating system has very good abrasion and chemical resistant properties.

The slip resistant aggregate consists of graded aluminium oxide - Centrecoat Emery Aggregate.


Concrete should be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes, etc.

Smooth concrete, or concrete with soft laitance, shall be mechanically treated by diamond grinding or grit blasting to provide a clean profiled surface. Should this not be practicable then acid etching, although less preferable, is also an option. Metal surfaces shall be power wire brushed to remove any rust and loose or flaking material. Grit blasting is recommended, where practical, for optimum performance. Coating application should be carried out immediately after preparation. Wood surfaces shall be sanded to a smooth finish, and all previous coating removed. Previously untreated wood shall be sealed with a coat of Centrecoat 525 WB Primer.

Pour the contents of the CURING AGENT container into the BASE container and thoroughly mix, preferably by mechanical means until a uniform colour and consistency is achieved.

Pour the mixed liquid components into a shallow roller tray. Apply by medium pile roller (not foam), to a measured 5 m². Immediately scatter the AGGREGATE uniformly onto the wet coating and ‘back roller’ to cover and encapsulate the aggregate.

Note: Although sufficient Aggregate is supplied to allow a full blinding, a lighter scatter may be made if required.

Recommended Products To Use

Centrecoat MMA Tool Cleaner

Centrecoat MMA Tool Cleaner

An equipment cleaner suitable for the removal of uncured methyl methacrylate resins.

£40.08 (£48.10 Inc VAT)
Centrecoat 525 WB Primer

Centrecoat 525 WB Primer

A two pack, water dispersible epoxy based primer / sealer / clear coating.

£50.00 (£60.00 Inc VAT)