Centrecoat SPE Single Pack Epoxy Road Line Paint is a single pack road line paint, chemical and fuel resistance with an slip resistant finish for roads, airport runways etc.
Centrecoat SPE Single Pack Epoxy Road Line Paint is a single pack product designed for marking road lines. It has been specially manufactured to precision, offering abrasion resistance, chemical and fuel resistance with an anti slip finish.
Centrecoat SPE Single Pack Epoxy Road Line Paint can be applied to most road surfaces and is available in yellow, black and white for producing a matt finish. Centrecoat Epoxy Line Paint offers excellent hard wearing characteristics with an anti skid finish.
Centrecoat SPE Single Pack Epoxy Road Line Paint can be applied using roller or brush but is highly recommended for use with Spray Line Marking Machines for a more accurate, pleasing result. Centrecoat Single Pack Epoxy Road Line Paint offers a theoretical coverage rate of 59m by 5cm wide, per litre. Touch dry after just 10 minutes and can be recoated after just 1-2 hours if this is necessary to achieve full opacity.
Surface and Environment
Centrecoat Epoxy Line Paint can be applied to most common road surfaces such as tarmac and asphalt as well as concrete, wood, brick and paving found in car parks, aerodromes, factories, roads, airports, carriageways, car parking spaces, cycle lanes, sports facilities and playgrounds.
- Offers a fast drying time and can be applied to most road surfaces also concrete, wood, brick and paving
- Single Pack Epoxy Road Striping (Marking) Paint has good wear and anti-skid characteristics
- Epoxy Road Marking Paint is ideal for car parks, aerodromes, factories, roads, airports and sports facilities and playgrounds.
- Epoxy road line marking paint can be applied by brush, roller and spray line marking machine
- Theoretical coverage rate for line paint is a line 30m long by 100 mm wide, per litre per coat
- Available in 5 and 20 Litres (4 x 5 Litre Tubs)
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.