Glixtone SS01 is a solvent-based clear stabilising solution sealer for the pre-treatment of chalky, friable or porous masonry surfaces.
Glixtone Stabilising Solution SS01is a pre-treatment clear sealer for chalky, friable or porous masonry surfaces that will maximise coverage rate of finish. Developed as a solvent-based clear sealer for the pre-treatment of chalky, friable or porous masonry surfaces used to stabilise surfaces prior to the application of emulsion paints and masonry coatings. SS01 is almost colourless and is composed of flexible acrylic resins in white spirit.
Glixtone Stabilising Solution SS01 helps to ensure an even finish on surfaces of uneven absorption or high porosity and will also maximise the coverage rate of the finish.
Particularly suitable for treating surfaces of uneven absorption or high porosity to help ensure an even finish. Glixtone Stabilising Solution SS01 will also maximise the coverage rate of the finish.
Can be applied by paint brush, roller or paint sprayer. There is no need to thin Glixtone Stabilising Solution SS01, just use straight from the can.
Surface and Environment
Glixtone Stabilising Solution SS01 contains no added lead. Glixtone Stabilising Solution SS01 is not suitable for use over creosote, tar or bitumen surfaces.
SS01 has been formulated from flexible acrylic resins in white spirit. Prepare surface by removing all flaking and loose material back to a sound surface. Make good any defective areas. Ensure all surfaces are clean, dry and firm. Remove any organic growth using a stiff bristle (not wire) brush and apply a liberal coat of Glixtone Sterilising Solution.
Stir SS01 thoroughly before use and apply by paint brush or paint sprayer. Coverage is depending upon the porosity and texture of the substrate. Glixtone Stabilising Solution SS01 has a theoretical coverage rate 6-8m2 per litre on smooth, lightly powdering surfaces of average porosity. Drying time will depend upon weather conditions and average temperature. Under normal conditions allow 12 hours. Clean all paint brushes and paint spraying equipment immediately after use with Glixtone All Seasons 01 Thinner (CZO1BS). Store in secure, dry conditions at temperature between 5 Degrees and 28 Degrees C.
|Suitable Substrates:||For the pre-treatment of chalky, friable or porous masonry surfaces|
|Application Method:||Brush or Spray|
|Theoretical Coverage:||6-8m2 per litre on smooth, lightly powdering surfaces of average porosity|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Drying Time:||Under normal conditions 12 hours|
|Limitations:||Do not use over creosote, tar or bitumen surfaces|
|Cleaner / Thinner:||Clean all brushes & spray equipment immediately after use with Glixtone All Seasons Thinner 01. Do not thin|
|Shelf Life:||1 year in original, unopened container if stored in accordance with recommendations|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.