Centrecoat Chlorinated Rubber Swimming Pool Paint

SKU
id25948
UN1263 (Class: 3, Pk Grp: III)
A premium quality modified chlorinated rubber top coat for use over a suitable primer in swimming pools.
Available in 5 Litres in BS 18-E-51
£69.96 £58.30
In stock
Product Description

Centrecoat Chlorinated Rubber Swimming Pool Paint is a premium quality modified chlorinated rubber top coat for use over a suitable primer in swimming pools.

Best Uses

Centrecoat Chlorinated Rubber Swimming Pool Paint is resistant to salt water, a wide range of chemicals and acids making it ideal for swimming pool environments. This chlorinated rubber swimming pool paint gives high quality protection in moderate to severe corrosive atmospheres.

Can be used for swimming pools, parlours, piping, laundries and marine applications.

Not suitable for vinyl swimming pool liners or plastic tanks.

Application

Surfaces to be painted should be free from nibs, cavities, and other imperfections. Mould, oil stains, if any, must be removed. Moisture content of concrete should be below 14% prior to application of any coating. Concrete and render should be treated with a suitable acid etch prior to painting to remove any dirt and laitance and to create a good “key” for the paint.

Apply a 10% thinned coat of Centrecoat Chlorinated Rubber Swimming Pool Paint to prime and seal the surface prior to applying any unthinned coats. Surfaces previously painted with Centrecoat Chlorinated Rubber Swimming Pool Paint and that are in good condition can be scrubbed clean and the surface roughened to help adhesion of the new coating.

Old perished Centrecoat Chlorinated Rubber Swimming Pool Paint coats should be removed mechanically and treated as new substrate and prepared accordingly.

Failing to prepare the surface correctly may possibly result in the chlorinated rubber paint failing.

Mix well before use. In confined spaces, provide adequate ventilation during application and drying.
Apply a preceding coat of a suitable primer on metal and wood. On concrete and porous surfaces use Centrecoat Chlorinated Rubber Swimming Pool Paint thinned 10% with suitable thinner. Apply via airless spray and/or brush or micro fibre paint roller. For airless spray, dilute up to 5% with suitable thinner. Use nozzle size 0.017” - 0.021” at a pressure of 150 BAR. Apply slowly to prevent the paint from bubbling.

Always provide good ventilation during the application and drying processes. An average pool will require 25 litres of chlorinated rubber paint for 2 coats.

It is vital that the paint is allowed to dry for a minimum of 10 - 14 days at 20°C before the pool is refilled. This time span will need to increase at lower temperatures and high humidity.

Technical Details
Components: Single Pack
Type: Chlorinated Rubber
Finish: Gloss
Stock Colours: 18-E-51
Tintable: No
VOC Content: 625 g/L
Volume Solids: 25 - 33%
Suitable Substrates: Wood, concrete, render, swimming pools
Application Method: Airless spray, brush or micro fibre paint roller
Theoretical Coverage:

Approx 14m2 per litre at 20 - 25 microns DFT (based on airless spray application)


Coverage rates are approximate and will vary according to amount of overcoating during application and substrate
porosity. Each subsequent coat will generally require less material.

Wet Film Thickness (WFT): 75 microns
Dry Film Thickness (DFT): 20 - 25 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: Minimum 16 hours at 20°C
Fully Cured: 7 - 14 days days at 20°C
Cleaner / Thinner: Suitable thinner
Shelf Life: See container
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use