Developed with Remmers as part of the Centrecoat Colorflex Render System for new Park Homes as well as overcoating Resitex type textured finishes. Centrecoat Color Flex is a high crack bridging, anti carbonation, water repellent masonry paint suitable for walls and concrete surfaces.
Due to it's elastomeric crack bridging qualities, Centrecoat Color Flex is an ideal masonry paint for external walls that are susceptible to movement. It is being used to refresh and waterproof Park Homes coated in Resitex and will provide waterproofing and protection for up to 15 years. With high water repellence and weather resistance, Centrecoat Color Flex is ideal for building located in coastal or in exposed environment’s. Ideal for use within a system for temporary buildings that are susceptible to movement, or at risk of render damage during relocation and transport.
Centrecoat Color Flex is part of the Centrecoat Colorflex Render System for application and protection of park homes, static homes, mobile units and other portable, temporary buildings. Suitable for application to external renders constructed from OSB and MgO board and concrete facades.
- High crack-bridging capability
- UV-crosslinking binder
- Carbonation-inhibiting sd CO₂ ≥ 115 m
- Highly water-repelling w ≤ 0.1 kg/(m² ∙ h0.5)
- Water vapour permeable
- Very good hiding power
- Approved by the German Federal Highway Research Institute (BASt)
- Tested in accordance with DIN EN 1504-2
- Weather resistant
- Colour stable
See system sheet on the Technical tab above for application details when using as part of the Centrecoat Colorflex Render System.
The substrate must be dry, clean, load-bearing and free of dust. Free of aggressive salts. Prime load-bearing, mineral substrates with Centrecoat Funcosil BI. Stir well. Coat the surface using a suitable tool. Apply the material in 2 or 3 coats, depending on the condition of the substrate. Wait at least 8 hours between coats.
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product. Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required. Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.
Apply using brush, surface brush, lambs wool roller or airless spraying equipment. Wash tools and any splashed material with water immediately and while wet.
Approvals and Certifications
- BASt surface protection systems OS-DII (Remmers System OS 5a)
- Test report Bodycote reaction to fire
- Test report P 7911 Kiwa EN 1504-2 - OS 5a OS Concre-Fill
- Test report P 8450-1 Kiwa EN 1504-2 - OS 5a Betofix Filler
- Certificate of compliance OS 5a - Betofix Filler
- Certificate of compliance OS 5a - OS Concre-Fill
Developed with Centrecoat as part of the Centrecoat Colorflex Render System for Park Homes.
- Remmers Betofix Filler (1008)
- Remmers Color PA Fill (6490)
- Remmers Color Flex Fill (2989)
- Remmers Primer SV (6438)
- Remmers Impregnation Primer (0642)
- Remmers cleaning products
- Remmers concrete protection and repair systems
|Tintable:||Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||Concrete and Facade surfaces|
|Application Method:||Brush, surface brush, lamb's wool roller, airless spraying equipment|
|Theoretical Coverage:||Approx. 0.65 litres per m2 in three coats|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||500 microns|
|Overcoatable:||Wait at least 8 hours between coats.|
|Cleaner / Thinner:||Water while product is still wet|
|Shelf Life:||If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.|
|Packaging:||Available in 12.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.