Centrecoat Color Flex Fill is a highly elastic primer with good filling properties that has been developed with Remmers as part of the Centrecoat Colorflex Render System for Park Homes.
Centrecoat Color Flex Fill is part of the Centrecoat Colorflex Render System for application and protection of park homes, static homes, mobile units and other portable, temporary buildings.
Benefiting from high crack bridging capabilities, this render filler is ideal for temporary buildings that are susceptible to movement, or at risk of render damage during relocation and transport.
Centrecoat Color Flex Fill is ideal for application to both new facades and concrete surfaces. Suitable for application to external renders constructed from OSB and MgO board and concrete facades. This render filler is also suitable for the repair of old, cracked facade surfaces when used within the Colorflex Render System. Centrecoat Color Flex Fill is also suitable for application for load-bearing, such as adhering old coatings on a mineral or synthetic resin base.
See system sheet on the Technical tab above for application details when using as part of the Centrecoat Colorflex Render System.
The substrate must be dry, clean, load-bearing and free of dust and free of aggressive salts. Prime load-bearing, mineral substrates with Remmers Funcosil BI.
Stir well using a mechanical paddle mxi. Coat the surface using a roller or trowel. Apply the material in 2 or 3 coats, depending on the condition of the substrate. Wait at least 24 hours before applying subsequent layers. Alternatively, embed a textile scrim material into the first layer for surface reinforcement.
For a Smooth Surface - Apply material using a lamb's wool roller. Use a brush to work the material into the gaps, making sure that the material does not accumulate in any spots.
For a Texture Surface - Apply the material evenly using a lamb's wool roller. Then, use an appropriate textured roller to achieve the desired texture.
Clean tools, equipment and any splashed material immediately with water while still fresh.
Developed with Centrecoat as part of the Centrecoat Colorflex Render System for Park Homes.
|Type:||UV-crosslinking hybrid acrylate copolymer extended mineral filler|
|Stock Colours:||Antique White|
|VOC Content:||< 40 g/L|
|Suitable Substrates:||For exterior facades and concrete surfaces such as park homes|
|Application Method:||Brush, Lambs Wool Roller, Brush, and / or Stainless Steel Trowel|
|Theoretical Coverage:||Approx. 0.30 - 1.00 Litres per m2 depending on the unevenness of the substrate.|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Overcoatable:||Wait at least 24 hours at 20°C before applying subsequent layers.|
|Cleaner / Thinner:||Clean tools, equipment and any splashed material immediately with water while still fresh.|
|Shelf Life:||If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.|
|Packaging:||Available in 12.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.