Centrecoat Induline Fast Filler is a one pack filler used in the preparation of external wood and mineral substrates prior to painting. Developed with Remmers as part of the Centrecoat Colorflex Render System for Park Homes.
Centrecoat / Remmers Induline Fast Filler is formulated for the repair and preparation of external wood and mineral substrates prior to application of a Remmers coating. Ideal for the filling of porous substrates and voids.
- Quick drying at low shrinkage
- Easy to sand
- Good filling performance
- Solvent-free and environmentally friendly
Centrecoat Induline Fast Filler is part of the Centrecoat Colorflex Render System for application and protection of park homes, static homes, mobile units and other portable, temporary buildings. Suitable for application to external renders constructed from OSB and MgO board and concrete façades.
Clean voids and fill in gaps using a spatula applying light pressure. Refill larger voids after a drying time of approx 3 hours at 20°C. Maximum layer thickness 3mm per application.
To be used outdoors only with the correspondent resistant coating. Test unknown coating systems for incompatibility. Not suitable for areas which are prone to corrosion. Can be sanded/coated: after approx. 3 hours at 20°C.
|Suitable Substrates:||External wood and mineral substrates|
|Theoretical Coverage:||Dependant on substrate|
|Wet Film Thickness (WFT):||Max 3mm depth per application|
|Dry Film Thickness (DFT):||-|
|Surface Dry:||30 minutes at 20°C|
|Sandable:||After 3 hours minimum at 20°C|
|Cleaner / Thinner:||Cleaning with water directly after use or with Teknos Aqua RK-898-Cleaning Concentrate for persistent contamination.|
|Shelf Life:||If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.|
|Packaging:||Available in Packs of 12x 400ml tubes|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.