Centrecoat R14 Delicate Rust Stain Remover *CLEARANCE*

Formulated to remove rust stains from delicate surfaces.
Available in 250ml
£3.60 £3.00
In stock
Product Description

Please note, this product will be shortly discontinued. See Owatrol Net-Trol as a suitable alternative.

Centrecoat R14 Rust Stain Remover is formulated to remove rust stains from delicate surfaces, when other rust removers cannot be used due to their corrosive nature.

Best Uses

Centrecoat Rust Stain Remover is highly concentrated and efficient at removing rust and oxidisation from marble, stone, wood, paint, fibreglass, and concrete. With a neutral pH, allows a wider range of uses that other products of its type. Non-acid rust remover converts rust compounds in to water soluble solution, that will change colour on activation, can be simply rinsed away with clean water.


Test first on the surface is essential to establish the correct dwell time. This will ensure the underlying substrate is not affected. Shake well prior to use and apply neat to a dry surface. Leave to react for 10 minutes for light staining, or for heavy staining up to 2 hours. Once applied do not let the product dry out, reapply if the surface becomes dry. Rinse clean with plenty of water, for best results use diluted with cold water. Clean tools in water.

Technical Details
Components: One Part
Type: A blend of biodegradable detergents and Thioglycolic Acid Sodium salt
Finish: -
Stock Colours: Clear (Dark Purple while working)
Tintable: No
VOC Content: 0.0g per Litre
Volume Solids: -
Suitable Substrates: For marble, stone, wood, paint, fibreglass, concrete
Application Method: Brush, Roller, Spray
Theoretical Coverage: 3 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: Keep in a dry place (between 5°C and 35°C). 24 months following the production date when kept in the original unopened container
Packaging: Available in 250ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use