Rustoleum Paracem Semi Gloss is a decorative, easy to clean, high durability water based cladding and masonry paint that can be tinted to a full range of colours.
Rust-Oleum Paracem Semi Gloss is suitable for the durable painting of interior and exterior old and new masonry, cement, concrete or plaster. Suitable for use with Rust-Oleum Pegafix or Pegalink.
The substrate must be sufficiently dry (max. 4% moisture content) and stable. Clean walls thoroughly with steel brush or high pressure water cleaning. In case of fungal growth: treat the walls first with an adequate moss-preventing product. To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
- Recoatable with Rustoleum Pegagraff Hydro
|Type:||Waterborne semi-gloss acrylic paint|
|Stock Colours:||601 White|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||15.0g per Litre|
|Volume Solids:||35 - 38%|
|Suitable Substrates:||For painting of old and new masonry, cement, concrete or plaster|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||8 - 10 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||125 microns|
|Dry Film Thickness (DFT):||45 microns|
|Touch Dry:||40 minutes at 20°C|
|Overcoatable:||After 4 hours at 20°C|
|Fully Cured:||1 day at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 4 and 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.