Rustoleum Hard Hat 2185 1085 Galva Zinc

Aerosol: UN1950 (Class: 2.1), Tin: UN1263 (Class: 3, Pk Grp: III)
Cold galvanising zinc paint for cathodic anti corrosion metal protection and rust resistance.
Available in 500ml, 1 Litre, 1 Kg Tins and 500ml Aerosols
From £17.51 £14.59
In stock
Only %1 left
Product Description

Rustoleum Galva Zinc 1085 is a fast drying, zinc rich primer based on an epoxy ester resin. Contains pure zinc as pigment and provides cathodic protection to metal to protect against rust.

Best Uses

Rustoleum Galva Zinc 1085 is ideally suited for use in industrial exposures where there is a need for protecting steel against rust. Rustoleum Galva Zinc 1085 is suitable for use on a variety of different metal substrates, including storage tanks, guard rails, ducts and production wells.

  • Matt grey appearance
  • 90% zinc in the dry film (99% pure zinc)
  • To protect bare, rust free metal and galvanised
  • Ideal for touching-up larger areas
  • Conforms to DIN 50.976 (1983)
  • Resists 430 hours of salt spray testing (DIN)
  • Heat-resistant up to 300°C


Rustoleum 1085 Galva Zinc should be used on new, bare steel, blasted steel or galvanized steel surfaces. Rustoleum 1085 Galva Zinc is primarily intended for brush application on small areas or for touch-up. Can be recoated with non-saponifiable coatings. Rustoleum 1085 Galva Zinc should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.

Technical Details


  • Epoxy ester binder
  • Recoatable with non saponifiable coatings

Technical info

Components: Single Pack
Type: Solvent Based
Finish: Matt
Stock Colours: Grey
Tintable: No
VOC Content: 630 g/l
Volume Solids: -
Suitable Substrates: New, bare steel or galvanised steel
Application Method: Brush
Theoretical Coverage: 1,4 m² per spray can at 35 μm dry
Wet Film Thickness (WFT): 100 μm
Dry Film Thickness (DFT): 35 μm
Induction Time: -
Touch Dry: 10 minutes at 20°C
Dry to Handle: 30 minutes at 20°C
Dry to Recoat: Within 1 hour or after 48 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: -
Shelf Life: 3 years from date of production in unopened cans
Packaging: Available in 500ml, 1 Litre, 1 Kg Tins and 500ml Aerosols

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use