£7.50 delivery on orders excluding certain products & postcodes *
Mapei Mapegrout T60
SKU
id10312
Non Hazardous
A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.
Available in 25 Kg in Grey
£27.44
£22.87
In stock
Product Description
Mapei Mapegrout T60 is a single component, sulphate-resistant, fibre-reinforced, shrinkage compensated, thixotropic mortar for the repair of concrete and reinforced structures.
Mapegrout T60 is a pre-blended thixotropic cement based mortar composed of sulphate-resistant hydraulic binders, synthetic polyacrylonitrile fibres, organic corrosion inhibitors, select aggregates and special water-retaining admixtures developed by Mapei. Mapegrout is ideal for concrete structures subject to sulphate attack and for repairs to concrete coverings damaged by corroded reinforcing bars.
Approved for use by London Underground.
Best Uses
Use Mapegrout T60 for repairs to pre-cast concrete structures, canal linings, hydraulic works, filling of rigid joints, cracks in floors, joints between walls, etc.
Application
Mapegrout T60 is supplied in powder form for mixing with water. Apply Mapegrout T60 using a putty knife or trowel to vertical surfaces in layers up to 4 cm thick or on ceilings up to 2 cm thick. Mapegrout T60 can also be applied using spray equipment.
Technical Details
Approvals
- London Underground Approved Products Register (APR) ID 2632
- Complies to European Standard EN 1504-3 R4
Technical
- Mapegrout T60 is suitable for repair and reconstruction of concrete structures
- Pot Life: 1 hour
- Waiting time between each layer: 1-2 hours
- Application temperature range: +5 to +35 degrees C.
- Available in 25 Kg bags
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.