Remmers Kiesol MB is a deep protection silicification for waterproofing and refurbishing old and new buildings in the Kiesol System according to WTA Code of Practice 4-4-04/D Injecting Masonry Work. Proved in practice for more than 50 years.
Best Uses
Remmers Kiesol MB is a liquid combination product made of water repelling silicic acid compounds and is best used for the following:
Water repelling, capillary narrowing, deep protection for waterproofing damp masonry work
Protection against capillary rising damp through injection with Kiesol in a borehole procedure
Diffusion open barrier zone (deep protection) against the effect of moisture from behind
Improved adhesion by priming, diluted 1:1 with water
Strengthens the substrate and increases chemical resistance through silicification
Faster working operations through silicification treatments with waterproofing grouts (system waterproofing in one day)
As a solvent-free, highly concentrated system component, Kiesol is environment-friendly and is thus also suitable for indoor applications
Suppresses capillary water absorption according to WTA, tested up to a degree of 80% moisture penetration by injecting under gravity
It is used in the refurbishment of old buildings as well as for waterproofing new buildings, however Kiesol is not suitable for impregnating façades.
Application
Application methods are dependent on the use of the product. Please see the technical information sheet for further information.
Remmers Kiesol MB is part of a wide range of Remmers Products available from Promain.