Bollom Brosteel Brush Grade Intumescent is a smooth, thin film Intumescent Coating for the Fire Protection of Structural Steel and other substrates. Due to its formulation, Brosteel does not require any specialist application skills and can be applied by brush or airless spray by any competent contractor. Whilst Brosteel provides the base coat fire protection, the system is completed by overcoating with Bollom Flameguard, providing a colourful, decorative finish and protecting the Intumescent Coating from accidental damage.
Bollom Brosteel Brush Grade Intumescent offers a quick drying formulation that ensures faster application and contract completion. It can be applied even in low temperatures, 5 Degrees C and above, which is a major advantage. Conventional Intumescent Coatings may require much higher drying temperatures. Brosteel is highly economical and cost effective when compared to other Fire Protective systems and can be applied at any stage during completion of the building, with minimum interference to other trades. The Brosteel system saves valuable time and cost on site.
Bollom Brosteel Brush Grade Intumescent is extremely easy to apply using brush, roller or airless spray and is available in both gloss and eggshell finishes. With fast drying capabilities, it is easy to complete a full project in just one day, and apply the intumescent coat and decorative finishing coat in just a matter of hours.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Bollom Brosteel Brush Grade Intumescent comes to life in the event of a fire and works by softening and expanding to form a carbon foam layer, which insulates and protects the structure from intense heat. This product has been designed specifically for application to structural steel.
Fire Test Data: